lkml.org 
[lkml]   [2016]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 7/8] media: vidc: add Makefiles and Kconfig files
From
Date
On 09/07/2016 01:37 PM, Stanimir Varbanov wrote:
> Makefile and Kconfig files to build the video codec driver.
>
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> ---
> drivers/media/platform/qcom/Kconfig | 8 ++++++++
> drivers/media/platform/qcom/Makefile | 6 ++++++
> drivers/media/platform/qcom/vidc/Makefile | 15 +++++++++++++++
> 3 files changed, 29 insertions(+)
> create mode 100644 drivers/media/platform/qcom/Kconfig
> create mode 100644 drivers/media/platform/qcom/Makefile
> create mode 100644 drivers/media/platform/qcom/vidc/Makefile
>
> diff --git a/drivers/media/platform/qcom/Kconfig b/drivers/media/platform/qcom/Kconfig
> new file mode 100644
> index 000000000000..4bad5c0f68e4
> --- /dev/null
> +++ b/drivers/media/platform/qcom/Kconfig
> @@ -0,0 +1,8 @@
> +comment "Qualcomm V4L2 drivers"
> +
> +menuconfig QCOM_VIDC
> + tristate "Qualcomm V4L2 encoder/decoder driver"
> + depends on ARCH_QCOM && VIDEO_V4L2
> + depends on IOMMU_DMA
> + depends on QCOM_VENUS_PIL
> + select VIDEOBUF2_DMA_SG

If at all possible, please depend on COMPILE_TEST as well!

Also missing: a patch adding an entry to the MAINTAINERS file.

Regards,

Hans

> diff --git a/drivers/media/platform/qcom/Makefile b/drivers/media/platform/qcom/Makefile
> new file mode 100644
> index 000000000000..150892f6533b
> --- /dev/null
> +++ b/drivers/media/platform/qcom/Makefile
> @@ -0,0 +1,6 @@
> +#
> +# Makefile for the QCOM spcific video device drivers
> +# based on V4L2.
> +#
> +
> +obj-$(CONFIG_QCOM_VIDC) += vidc/
> diff --git a/drivers/media/platform/qcom/vidc/Makefile b/drivers/media/platform/qcom/vidc/Makefile
> new file mode 100644
> index 000000000000..f8b5f9a438ee
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/Makefile
> @@ -0,0 +1,15 @@
> +# Makefile for Qualcomm vidc driver
> +
> +vidc-objs += \
> + core.o \
> + helpers.o \
> + vdec.o \
> + vdec_ctrls.o \
> + venc.o \
> + venc_ctrls.o \
> + hfi_venus.o \
> + hfi_msgs.o \
> + hfi_cmds.o \
> + hfi.o \
> +
> +obj-$(CONFIG_QCOM_VIDC) += vidc.o

I recommend renaming the module to qcom-vidc. 'vidc' is too generic.

Regards,

Hans

>

\
 
 \ /
  Last update: 2016-09-19 12:36    [W:0.477 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site