Messages in this thread | | | Date | Mon, 19 Sep 2016 11:34:59 +0200 | From | Boris Brezillon <> | Subject | Re: [PATCH BUGFIX] mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functions |
| |
On Fri, 16 Sep 2016 10:09:25 +0200 Lothar Waßmann <LW@KARO-electronics.de> wrote:
> Hi, > > On Thu, 15 Sep 2016 18:06:05 +0200 Boris Brezillon wrote: > > Hi Lothar, > > > > On Fri, 9 Sep 2016 16:44:11 +0200 > > Lothar Waßmann <LW@KARO-electronics.de> wrote: > > > > > commit a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") > > > introduced a regression accessing the OOB area from the mxc_nand > > > driver due to an Obiwan error in the mxc_nand_v[12]_ooblayout_free() > > > functions. They report a bogus oobregion { 64, 7 } which leads to > > > errors accessing bogus data when reading the oob area. > > > > > > Prior to the commit the mtd-oobtest module could be run without any > > > errors. With the offending commit, this test fails with results like: > > > |Running mtd-oobtest > > > | > > > |================================================= > > > |mtd_oobtest: MTD device: 5 > > > |mtd_oobtest: MTD device size 524288, eraseblock size 131072, page size 2048, count of eraseblocks 4, pages per eraseblock 64, OOB size 64 > > > |mtd_test: scanning for bad eraseblocks > > > |mtd_test: scanned 4 eraseblocks, 0 are bad > > > |mtd_oobtest: test 1 of 5 > > > |mtd_oobtest: writing OOBs of whole device > > > |mtd_oobtest: written up to eraseblock 0 > > > |mtd_oobtest: written 4 eraseblocks > > > |mtd_oobtest: verifying all eraseblocks > > > |mtd_oobtest: error @addr[0x0:0x19] 0x9a -> 0x78 diff 0xe2 > > > |mtd_oobtest: error @addr[0x0:0x1a] 0xcc -> 0x0 diff 0xcc > > > |mtd_oobtest: error @addr[0x0:0x1b] 0xe0 -> 0x85 diff 0x65 > > > |mtd_oobtest: error @addr[0x0:0x1c] 0x60 -> 0x62 diff 0x2 > > > |mtd_oobtest: error @addr[0x0:0x1d] 0x69 -> 0x45 diff 0x2c > > > |mtd_oobtest: error @addr[0x0:0x1e] 0xcd -> 0xa0 diff 0x6d > > > |mtd_oobtest: error @addr[0x0:0x1f] 0xf2 -> 0x60 diff 0x92 > > > |mtd_oobtest: error: verify failed at 0x0 > > > [...] > > > > > > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> > > > --- > > > drivers/mtd/nand/mxc_nand.c | 4 ++-- > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c > > > index 5173fad..fdee907 100644 > > > --- a/drivers/mtd/nand/mxc_nand.c > > > +++ b/drivers/mtd/nand/mxc_nand.c > > > @@ -893,7 +893,7 @@ static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section, > > > { > > > struct nand_chip *nand_chip = mtd_to_nand(mtd); > > > > > > - if (section > nand_chip->ecc.steps) > > > + if (section >= nand_chip->ecc.steps) > > > return -ERANGE; > > > > Hm, looking at the commit you're pointing to, it seems that this test > > is correct (we have X + 1 free sections, where X is the number of ECC > > steps). > > > You are right. I didn't verify the v1 case (for which I have no HW here > any more). > I'll send a corrected patch.
No need to resend, I fixed it locally.
Thanks,
Boris
| |