lkml.org 
[lkml]   [2016]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 2/3] ARM: dts: add TOPEET itop elite based board
On Sun, Sep 18, 2016 at 10:01:18PM +0800, Randy Li wrote:
> The TOPEET itop exynos 4412 have three versions base board. The
> Elite version is the cheap one without too much peripheral devices
> on it.
>
> Currently supported are serial console, wired networking(USB),
> USB OTG in peripheral mode, USB host, SD storage, GPIO buttons,
> PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also
> enabled.
>
> The FIMC is not used for camera currently, I enabled it just for a
> colorspace convertor.
>
> Signed-off-by: Randy Li <ayaka@soulik.info>
> ---
> .../bindings/arm/samsung/samsung-boards.txt | 3 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos4412-itop-elite.dts | 240 +++++++++++++++++++++
> 3 files changed, 244 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts

Looks good to me, for the record:

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

You don't need to resend the third patch. Rob took it.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2016-09-18 21:23    [W:0.042 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site