lkml.org 
[lkml]   [2016]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: openrisc: Consolidate setup to use memblock instead of bootmem
On Wed, Apr 06, 2016 at 07:08:41PM +0900, Stafford Horne wrote:
> Clearing out one todo item. This simplifies the boot process by using
> the memblock api throughout the init process.
>
> The old logic bootstrapped from memblock -> bootmem -> buddy allocator
> This is now simplified by using NO_BOOTMEM.
>
> Signed-off-by: Stafford Horne <shorne@gmail.com>

FWIW:

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

> ---
> arch/openrisc/Kconfig | 1 +
> arch/openrisc/TODO.openrisc | 3 ---
> arch/openrisc/include/asm/pgalloc.h | 1 -
> arch/openrisc/kernel/setup.c | 34 ++++++++++++----------------------
> arch/openrisc/mm/init.c | 2 +-
> arch/openrisc/mm/ioremap.c | 4 ----
> 6 files changed, 14 insertions(+), 31 deletions(-)
>
> diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
> index f1030d2..e760c83 100644
> --- a/arch/openrisc/Kconfig
> +++ b/arch/openrisc/Kconfig
> @@ -27,6 +27,7 @@ config OPENRISC
> select HAVE_DEBUG_STACKOVERFLOW
> select OR1K_PIC
> select OMPIC if SMP
> + select NO_BOOTMEM
>
> config MMU
> def_bool y
> diff --git a/arch/openrisc/TODO.openrisc b/arch/openrisc/TODO.openrisc
> index a2bda7b..c43d4e1 100644
> --- a/arch/openrisc/TODO.openrisc
> +++ b/arch/openrisc/TODO.openrisc
> @@ -5,9 +5,6 @@ that are due for investigation shortly, i.e. our TODO list:
>
> -- Implement the rest of the DMA API... dma_map_sg, etc.
>
> --- Consolidate usage of memblock and bootmem... move everything over to
> - memblock.
> -
> -- Finish the renaming cleanup... there are references to or32 in the code
> which was an older name for the architecture. The name we've settled on is
> or1k and this change is slowly trickling through the stack. For the time
> diff --git a/arch/openrisc/include/asm/pgalloc.h b/arch/openrisc/include/asm/pgalloc.h
> index 21484e5b..9c9f2ba 100644
> --- a/arch/openrisc/include/asm/pgalloc.h
> +++ b/arch/openrisc/include/asm/pgalloc.h
> @@ -23,7 +23,6 @@
> #include <linux/threads.h>
> #include <linux/mm.h>
> #include <linux/memblock.h>
> -#include <linux/bootmem.h>
>
> extern int mem_init_done;
>
> diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
> index 745ff14..60f784e 100644
> --- a/arch/openrisc/kernel/setup.c
> +++ b/arch/openrisc/kernel/setup.c
> @@ -51,18 +51,16 @@
>
> #include "vmlinux.h"
>
> -static unsigned long __init setup_memory(void)
> +static void __init setup_memory(void)
> {
> - unsigned long bootmap_size;
> unsigned long ram_start_pfn;
> - unsigned long free_ram_start_pfn;
> unsigned long ram_end_pfn;
> phys_addr_t memory_start, memory_end;
> struct memblock_region *region;
>
> memory_end = memory_start = 0;
>
> - /* Find main memory where is the kernel */
> + /* Find main memory where is the kernel, we assume its the only one */
> for_each_memblock(memory, region) {
> memory_start = region->base;
> memory_end = region->base + region->size;
> @@ -75,10 +73,11 @@ static unsigned long __init setup_memory(void)
> }
>
> ram_start_pfn = PFN_UP(memory_start);
> - /* free_ram_start_pfn is first page after kernel */
> - free_ram_start_pfn = PFN_UP(__pa(_end));
> ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
>
> + /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
> + min_low_pfn = ram_start_pfn;
> + max_low_pfn = ram_end_pfn;
> max_pfn = ram_end_pfn;
>
> /*
> @@ -86,22 +85,13 @@ static unsigned long __init setup_memory(void)
> *
> * This makes the memory from the end of the kernel to the end of
> * RAM usable.
> - * init_bootmem sets the global values min_low_pfn, max_low_pfn.
> */
> - bootmap_size = init_bootmem(free_ram_start_pfn,
> - ram_end_pfn - ram_start_pfn);
> - free_bootmem(PFN_PHYS(free_ram_start_pfn),
> - (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT);
> - reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size,
> - BOOTMEM_DEFAULT);
> -
> - for_each_memblock(reserved, region) {
> - printk(KERN_INFO "Reserved - 0x%08x-0x%08x\n",
> - (u32) region->base, (u32) region->size);
> - reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT);
> - }
> + memblock_reserve(__pa(_stext), _end - _stext);
> +
> + early_init_fdt_reserve_self();
> + early_init_fdt_scan_reserved_mem();
>
> - return ram_end_pfn;
> + memblock_dump_all();
> }
>
> struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
> @@ -327,8 +317,8 @@ void __init setup_arch(char **cmdline_p)
> initrd_below_start_ok = 1;
> #endif
>
> - /* setup bootmem allocator */
> - max_low_pfn = setup_memory();
> + /* setup memblock allocator */
> + setup_memory();
>
> /* paging_init() sets up the MMU and marks all pages as reserved */
> paging_init();
> diff --git a/arch/openrisc/mm/init.c b/arch/openrisc/mm/init.c
> index f85b73d..6972d5d 100644
> --- a/arch/openrisc/mm/init.c
> +++ b/arch/openrisc/mm/init.c
> @@ -106,7 +106,7 @@ static void __init map_ram(void)
> }
>
> /* Alloc one page for holding PTE's... */
> - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
> + pte = (pte_t *) __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE));
> set_pmd(pme, __pmd(_KERNPG_TABLE + __pa(pte)));
>
> /* Fill the newly allocated page with PTE'S */
> diff --git a/arch/openrisc/mm/ioremap.c b/arch/openrisc/mm/ioremap.c
> index 62b08ef..d11a594 100644
> --- a/arch/openrisc/mm/ioremap.c
> +++ b/arch/openrisc/mm/ioremap.c
> @@ -124,11 +124,7 @@ pte_t __init_refok *pte_alloc_one_kernel(struct mm_struct *mm,
> if (likely(mem_init_done)) {
> pte = (pte_t *) __get_free_page(GFP_KERNEL | __GFP_REPEAT);
> } else {
> - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
> -#if 0
> - /* FIXME: use memblock... */
> pte = (pte_t *) __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE));
> -#endif
> }
>
> if (pte)

\
 
 \ /
  Last update: 2016-09-18 17:24    [W:0.069 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site