lkml.org 
[lkml]   [2016]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v1 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI
Date
On Wed, 2016-09-14 at 12:05 +0530, Sanchayan Maity wrote:
> Remove the use of DDC I2C bus bitbang to support reading of EDID
> and rely on support from internal HDMI I2C master controller instead.
> As a result remove the device tree property ddc-i2c-bus.
>
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> ---
> Hello,
>
> This patch is tested with the following patch applied
> https://patchwork.kernel.org/patch/9296883/
>
> and is based on the suggestions from Vladimir
> https://lkml.org/lkml/2016/8/29/322
>
> This and following two patches are based on top of shawn's
> for-next branch.
>
> Regards,
> Sanchayan.
> ---
>  arch/arm/boot/dts/imx6q-apalis-ixora.dts |  6 ------
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi    | 25 +++++++++-------------
> ---
>  2 files changed, 9 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> index 207b85b..d99979e 100644
> --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> @@ -55,7 +55,6 @@
>        "fsl,imx6q";
>  
>   aliases {
> - i2c0 = &i2cddc;
>   i2c1 = &i2c1;
>   i2c2 = &i2c2;
>   i2c3 = &i2c3;

I would suggest rising them up in rank.

> @@ -186,11 +185,6 @@
>  };
>  
>  &hdmi {
> - ddc-i2c-bus = <&i2cddc>;
> - status = "okay";
> -};
> -
> -&i2cddc {
>   status = "okay";
>  };
>  
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index 99e323b..8c67dd8 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -53,18 +53,6 @@
>   status = "disabled";
>   };
>  
> - /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
> - i2cddc: i2c@0 {
> - compatible = "i2c-gpio";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c_ddc>;
> - gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> -  &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> - >;
> - i2c-gpio,delay-us = <2>; /* ~100 kHz */
> - status = "disabled";
> - };
> -
>   reg_1p8v: regulator-1p8v {
>   compatible = "regulator-fixed";
>   regulator-name = "1P8V";
> @@ -209,6 +197,12 @@
>   };
>  };
>  
> +&hdmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hdmi_ddc>;
> + status = "disabled";
> +};
> +
>  /*
>   * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
>   * board)
> @@ -633,11 +627,10 @@
>   >;
>   };
>  
> - pinctrl_i2c_ddc: gpioi2cddcgrp {
> + pinctrl_hdmi_ddc: hdmiddcgrp {
>   fsl,pins = <
> - /* DDC bitbang */
> - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> - MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
> + MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL
> 0x4001b8b1
> + MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA
> 0x4001b8b1
>   >;
>   };
 
Rest looks fine and tested working fine on top of 4.8.0-rc6-next-20160916.
\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.072 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site