Messages in this thread | | | From | Sinan Kaya <> | Subject | [PATCH V2 0/5] PCI: error handling clean up and add CRS support | Date | Fri, 16 Sep 2016 16:06:29 -0400 |
| |
Device states on the bus are not saved and restored for some of the bus reset paths as:
1. IB/hfi1 via pci_reset_bridge_secondary_bus 2. PCI/AER via pci_reset_bridge_secondary_bus 3. PCI: dev_reset via parent bus reset
Changing the external API usage to pci_reset_bus outside of PCI code and adding save/restore into pci_parent_bus_reset function. Note that pci_parent_bus_reset is called with a device lock held.
A PCIe endpoint is allowed to issue CRS following an FLR request to indicate that it is not ready to accept new requests. Changing the polling mechanism in FLR wait function to go read the vendor ID instead of the command/status register. A CRS indication will only be given if the address to be read is vendor ID.
v1: http://www.spinics.net/lists/linux-pci/msg53596.html * initial implementation
Sinan Kaya (5): PCI/AER: replace pci_reset_bridge_secondary_bus with pci_reset_bus IB/hfi1: replace pci_reset_bridge_secondary_bus with pci_reset_bus PCI: save and restore bus on parent bus reset PCI: add CRS support to error handling path PCI: handle CRS returned by device after FLR
drivers/infiniband/hw/hfi1/pcie.c | 4 +--- drivers/pci/pci.c | 28 +++++++++++++++++++++++++++- drivers/pci/pcie/aer/aerdrv.c | 2 +- drivers/pci/pcie/aer/aerdrv_core.c | 2 +- 4 files changed, 30 insertions(+), 6 deletions(-)
-- 1.9.1
| |