lkml.org 
[lkml]   [2016]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH V3 1/4] ARM64 LPC: Indirect ISA port IO introduced
Date
On Wednesday, September 14, 2016 10:16:28 PM CEST zhichang.yuan wrote:
> >
> > No need to guard includes with an #ifdef.
> If remove #ifdef here, extio.h should not contain any function external declarations whose definitions are in
> extio.c compiled only when CONFIG_ARM64_INDIRECT_PIO is yes.

There is no problem with making declarations visible for functions that
are not part of the kernel, we do that all the time.

> >> +#define BUILDS_RW(bwl, type) \
> >> +static inline void reads##bwl(const volatile void __iomem *addr, \
> >> + void *buffer, unsigned int count) \
> >> +{ \
> >> + if (count) { \
> >> + type *buf = buffer; \
> >> + \
> >> + do { \
> >> + type x = __raw_read##bwl(addr); \
> >> + *buf++ = x; \
> >> + } while (--count); \
> >> + } \
> >> +} \
> >> + \
> >> +static inline void writes##bwl(volatile void __iomem *addr, \
> >> + const void *buffer, unsigned int count) \
> >> +{ \
> >> + if (count) { \
> >> + const type *buf = buffer; \
> >> + \
> >> + do { \
> >> + __raw_write##bwl(*buf++, addr); \
> >> + } while (--count); \
> >> + } \
> >> +}
> >> +
> >> +BUILDS_RW(b, u8)
> >
> > Why is this in here?
> the readsb/writesb are defined in asm-generic/io.h which is included later, but the redefined insb/outsb need
> to call them. Without these readsb/writesb definition before insb/outsb redefined, compile error occur.
>
> It seems that copy all the definitions of "asm-generic/io.h" is not a good idea, so I move the definitions of
> those function needed here....
>
> Ok. I think your idea below defining in(s)/out(s) in a c file can solve this issue.
>
> #ifdef CONFIG_ARM64_INDIRECT_PIO
> #define inb inb
> extern u8 inb(unsigned long addr);
>
> #define outb outb
> extern void outb(u8 value, unsigned long addr);
>
> #define insb insb
> extern void insb(unsigned long addr, void *buffer, unsigned int count);
>
> #define outsb outsb
> extern void outsb(unsigned long addr, const void *buffer, unsigned int count);
> #endif
>
> and definitions of all these functions are in extio.c :
>
> u8 inb(unsigned long addr)
> {
> if (!arm64_extio_ops || arm64_extio_ops->start > addr ||
> arm64_extio_ops->end < addr)
> return readb(PCI_IOBASE + addr);
> else
> return arm64_extio_ops->pfin ?
> arm64_extio_ops->pfin(arm64_extio_ops->devpara,
> addr + arm64_extio_ops->ptoffset, NULL,
> sizeof(u8), 1) : -1;
> }
> .....

Yes, sounds good.

> >> @@ -149,6 +185,60 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
> >> #define IO_SPACE_LIMIT (PCI_IO_SIZE - 1)
> >> #define PCI_IOBASE ((void __iomem *)PCI_IO_START)
> >>
> >> +
> >> +/*
> >> + * redefine the in(s)b/out(s)b for indirect-IO.
> >> + */
> >> +#define inb inb
> >> +static inline u8 inb(unsigned long addr)
> >> +{
> >> +#ifdef CONFIG_ARM64_INDIRECT_PIO
> >> + if (arm64_extio_ops && arm64_extio_ops->start <= addr &&
> >> + addr <= arm64_extio_ops->end)
> >> + return extio_inb(addr);
> >> +#endif
> >> + return readb(PCI_IOBASE + addr);
> >> +}
> >> +
> >
> > Looks ok, but you only seem to do this for the 8-bit
> > accessors, when it should be done for 16-bit and 32-bit
> > ones as well for consistency.
> Hip06 LPC only support 8-bit I/O operations on the designated port.

That is an interesting limitation. Maybe still call the extio operations
and have them do WARN_ON_ONCE() instead?

If you get a driver that calls inw/outw on the range that is owned
by the LPC bus, you otherwise get an unhandled page fault in kernel
space, which is not as nice.

> >> diff --git a/drivers/bus/extio.c b/drivers/bus/extio.c
> >> new file mode 100644
> >> index 0000000..1e7a9c5
> >> --- /dev/null
> >> +++ b/drivers/bus/extio.c
> >> @@ -0,0 +1,66 @@
> >
> > This is in a globally visible directory
> >
> >> +
> >> +struct extio_ops *arm64_extio_ops;
> >
> > But the identifier uses an architecture specific prefix. Either
> > move the whole file into arch/arm64, or make the naming so that
> > it can be used for everything.
>
> I perfer to move the whole file into arch/arm64, extio.h will be moved to arch/arm64/include/asm;

Ok, that simplifies it a lot, you can just do everything in asm/io.h then.

Arnd

\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.089 / U:3.696 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site