lkml.org 
[lkml]   [2016]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 4/4] ARM64 LPC: support earlycon for UART connected to LPC
Date
From: "zhichang.yuan" <yuanzhichang@hisilicon.com>

This patch support the earlycon for UART connected to LPC on Hip06.
This patch is depended on the LPC driver.

Signed-off-by: zhichang.yuan <yuanzhichang@hisilicon.com>
---
drivers/bus/hisi_lpc.c | 113 +++++++++++++++++++++++++++++++++++
drivers/tty/serial/8250/8250_early.c | 26 +++++++-
2 files changed, 137 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c
index 9b364d0..2269828 100644
--- a/drivers/bus/hisi_lpc.c
+++ b/drivers/bus/hisi_lpc.c
@@ -360,6 +360,119 @@ void hisilpc_comm_outb(void *devobj, unsigned long ptaddr,


/**
+ * hisilpc_early_in - read/input operation specific for hisi LPC earlycon.
+ * @devobj: pointer to device relevant information of the caller.
+ * @inbuf: the buffer where the read back data is populated.
+ *
+ * for earlycon, dlen and count should be one.
+ *
+ * Return the data read from earlycon on success, error ID on fail.
+ *
+ */
+static unsigned int __init hisilpc_early_in(struct uart_port *port, int offset)
+{
+ unsigned int backval = 0;
+ unsigned int ret = 0;
+ struct lpc_cycle_para para;
+ struct hisilpc_dev lpcdev;
+
+ if (!port->mapbase || !port->iobase || !port->membase)
+ return -EINVAL;
+
+ para.opflags = FG_EARLYCON_LPC;
+ para.csize = 1;
+ lpcdev.membase = port->membase;
+
+ ret = hisilpc_target_in(&lpcdev, &para,
+ port->iobase + (offset << port->regshift),
+ (unsigned char *)&backval, 1);
+ return (ret) ? : backval;
+}
+
+/**
+ * hisilpc_early_out - write/output operation specific for hisi LPC earlycon.
+ * @port: pointer to uart_port of eralycon
+ *
+ * for earlycon, dlen and count should be one.
+ *
+ */
+static void __init hisilpc_early_out(struct uart_port *port, int offset,
+ int value)
+{
+ struct lpc_cycle_para para;
+ struct hisilpc_dev lpcdev;
+
+ if (!port->mapbase || !port->iobase || !port->membase)
+ return;
+
+ para.opflags = FG_EARLYCON_LPC;
+ para.csize = 1;
+ lpcdev.membase = port->membase;
+
+ (void)hisilpc_target_out(&lpcdev, &para,
+ port->iobase + (offset << port->regshift),
+ (unsigned char *)&value, 1);
+}
+
+
+/**
+ * early_hisilpc8250_setup - initilize the lpc earlycon
+ * @device: pointer to the elarycon device
+ * @options: a option string from earlycon kernel-parameter
+ *
+ * Returns 0 on success, non-zero on fail.
+ *
+ */
+static int __init early_hisilpc8250_setup(struct earlycon_device *device,
+ const char *options)
+{
+ char *p;
+ int ret;
+
+ if (!device->port.membase)
+ return -ENODEV;
+
+ if (device->port.iotype != UPIO_MEM)
+ return -EINVAL;
+
+ if (device->options) {
+ p = strchr(device->options, ',');
+ if (p && (p + 1) != '\0') {
+ ret = kstrtoul(++p, 0,
+ (unsigned long *)&device->port.iobase);
+ if (ret || device->port.iobase == 0)
+ return ret ?: -EFAULT;
+ } else
+ device->port.iobase = 0x2f8;
+ } else {
+ device->port.iobase = 0x2f8;
+ device->baud = 0;
+ }
+
+ device->port.serial_in = hisilpc_early_in;
+ device->port.serial_out = hisilpc_early_out;
+ /* must convert iotype to UPIO_PORT for Hip06 indirect-io */
+ device->port.iotype = UPIO_PORT;
+
+ /* disable interrupts from LPC */
+ writel(LPC_IRQ_CLEAR, device->port.membase + LPC_REG_IRQ_ST);
+ /* ensure the LPC is available */
+ while (!(readl(device->port.membase + LPC_REG_OP_STATUS) &
+ LPC_STATUS_IDLE))
+ cpu_relax();
+
+ return early_serial8250_setup(device, options);
+}
+
+
+
+EARLYCON_DECLARE(hisilpcuart, early_hisilpc8250_setup);
+OF_EARLYCON_DECLARE(hisilpcuart, "hisilicon,lpc-uart",
+ early_hisilpc8250_setup);
+
+
+
+/**
* hisilpc_ischild_ipmi - check whether the designated device is ipmi
* @dev: the device to be checked.
* @data: the value used to match the acpi device in checking.
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 85a12f0..3b5d0a8 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -37,7 +37,7 @@
#include <asm/io.h>
#include <asm/serial.h>

-static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
+static unsigned int __init serial8250_early_in_raw(struct uart_port *port, int offset)
{
offset <<= port->regshift;

@@ -57,7 +57,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
}
}

-static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
+static void __init serial8250_early_out_raw(struct uart_port *port, int offset, int value)
{
offset <<= port->regshift;

@@ -80,6 +80,28 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int
}
}

+static inline void __init serial8250_early_out(struct uart_port *port,
+ int offset, int value)
+{
+ if (port->serial_out)
+ port->serial_out(port, offset, value);
+ else {
+ port->serial_out = serial8250_early_out_raw;
+ serial8250_early_out_raw(port, offset, value);
+ }
+}
+
+static inline unsigned int __init serial8250_early_in(struct uart_port *port,
+ int offset)
+{
+ if (port->serial_in)
+ return port->serial_in(port, offset);
+
+ port->serial_in = serial8250_early_in_raw;
+ return serial8250_early_in_raw(port, offset);
+}
+
+
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)

static void __init serial_putc(struct uart_port *port, int c)
--
1.9.1
\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.161 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site