lkml.org 
[lkml]   [2016]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 01/26] dt-bindings: display: display-timing: Add property to configure sync drive edge
From
Date
On 09/12/16 16:05, Rob Herring wrote:
> On Thu, Sep 01, 2016 at 02:22:55PM +0300, Peter Ujfalusi wrote:
>> There are display panels which demands that the sync signal is driven on
>> different edge than the pixel data.
>> With the syncclk-active property we can specify the clk edge to be used to
>> drive the sync signal. When the property is missing it indicates that the
>> sync is driven on the same edge as the pixel data.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> CC: Rob Herring <robh+dt@kernel.org>
>> CC: Mark Rutland <mark.rutland@arm.com>
>> CC: devicetree@vger.kernel.org
>> ---
>> Documentation/devicetree/bindings/display/panel/display-timing.txt | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt
>> index e1d4a0b59612..1436292e7a56 100644
>> --- a/Documentation/devicetree/bindings/display/panel/display-timing.txt
>> +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt
>> @@ -32,6 +32,12 @@ optional properties:
>> - active low = drive pixel data on falling edge/
>> sample data on rising edge
>> - ignored = ignored
>> + - syncclk-active: with
>> + - active high = drive sync on rising edge/
>
> rising edge of what? pixel clk?

Yes, pixel clk, I have copied and modified the 'pixelclk-active' option.
Probably it would be better to state it explicitly.

>
>> + sample sync on falling edge
>> + - active low = drive sync on falling edge/
>> + sample sync on rising edge
>> + - omitted = same configuration as pixelclk-active
>> - interlaced (bool): boolean to enable interlaced mode
>> - doublescan (bool): boolean to enable doublescan mode
>> - doubleclk (bool): boolean to enable doubleclock mode
>> --
>> 2.9.3
>>


--
Péter

\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.083 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site