lkml.org 
[lkml]   [2016]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: L3 error handling (was: Re: [4.8.0-rc1] am335x-evm boot failure: n_tty_receive_buf_common: "Unable to handle kernel paging request..")
On Sat, Sep 10, 2016 at 04:46:49PM +0200, Matthijs van Duin wrote:
> It probably doesn't help that the L3 interconnect registers on the
> am335x aren't documented in the TRM. See below for its list of
> components, target IDs, address mapping, and L3 error irq routing
> (obtained by mostly-automated scanning/testing).

Whoops, I forgot something :)

// L3F service network
extern HostAgent host_l3f; // 0x440'00'000, id 0x00, no irq
extern TargetAgent ta_hash; // 0x440'00'200, id 0x02, irq_l3f 9
extern TargetAgent ta_aes1; // 0x440'00'300, id 0x03, irq_l3f 10
extern TargetAgent ta_ocmc; // 0x440'00'400, id 0x10, irq_l3f 2
extern TargetAgent ta_aes0; // 0x440'00'500, id 0x04, irq_l3f 11
extern TargetAgent ta_exp; // 0x440'00'600, id 0x06, irq_l3f 8
extern TargetAgent ta_edmatc0; // 0x440'00'700, id 0x07, irq_l3f 3
extern TargetAgent ta_edmatc1; // 0x440'00'800, id 0x08, irq_l3f 4
extern TargetAgent ta_edmatc2; // 0x440'00'900, id 0x09, irq_l3f 5
extern TargetAgent ta_l4hs_0; // 0x440'00'a00, id 0x05, irq_l3f 12
extern TargetAgent ta_edmacc; // 0x440'00'b00, id 0x0b, irq_l3f 6
extern TargetAgent ta_sgx; // 0x440'00'c00, id 0x0e, irq_l3f 13
extern TargetAgent ta_l3instr; // 0x440'00'd00, id 0x1f, irq_l3f 7
extern TargetAgent ta_pcie; // 0x440'00'e00, id 0x0f, irq_l3f 1
extern TargetAgent ta_emif; // 0x440'00'f00, id 0x01, irq_l3f 0
extern FlagCombiner irq_l3f; // 0x440'01'000, 14 × { app, dbg }, irq_top 0
extern FlagCombiner irq_top; // 0x440'01'100, 2 × { app, dbg }
extern Component stats0; // 0x440'02'000, size 0x800
extern Component stats1; // 0x440'03'000, size 0x1000
extern Component stats2; // 0x440'04'000, size 0x800
extern BwRegulator bwreg0; // 0x440'05'000

// L3S service network
extern HostAgent host_l3s; // 0x448'00'000, id 0x0c, no irq
extern TargetAgent ta_l4ls_0; // 0x448'00'100, id 0x11, irq_l3s 0
extern TargetAgent ta_l4ls_1; // 0x448'00'200, id 0x12, irq_l3s 1
extern TargetAgent ta_l4ls_2; // 0x448'00'300, id 0x13, irq_l3s 2
extern TargetAgent ta_l4ls_3; // 0x448'00'400, id 0x14, irq_l3s 3
extern TargetAgent ta_adc; // 0x448'00'500, id 0x0a, irq_l3s 10
extern FlagCombiner irq_l3s; // 0x448'00'600, 13 × { app, dbg }, irq_top 1
extern TargetAgent ta_gpmc; // 0x448'00'700, id 0x1e, irq_l3s 7
extern TargetAgent ta_mcasp0; // 0x448'00'800, id 0x20, irq_l3s 4
extern TargetAgent ta_mcasp1; // 0x448'00'900, id 0x21, irq_l3s 5
extern TargetAgent ta_mcasp2; // 0x448'00'a00, id 0x22, irq_l3s 6
extern TargetAgent ta_usb; // 0x448'00'b00, id 0x27, irq_l3s 9
extern TargetAgent ta_mmc2; // 0x448'00'c00, id 0x26, irq_l3s 12
extern TargetAgent ta_l4fw; // 0x448'00'd00, id 0x1b, irq_l3s 8
extern TargetAgent ta_l4wk_0; // 0x448'00'e00, id 0x0d, irq_l3s 11
extern Component stats3; // 0x448'04'000, size 0x800

l3ls ports 1-3 are just extrapolation since they aren't reachable from
the cortex-A8, the rest is verified.

I also have a list of initiators needed to identify them from L3 error
logs. I obtained it from info I found floating around and haven't much
validated it yet:

// L3 initiator ids
enum iid6_t {
I6_HASS_0 = 0x00, // Cortex-A8, 128-bit port 0 to RAM
I6_HASS_1 = 0x01, // Cortex-A8, 64-bit port 1 to peripherals
I6_DAP = 0x04, // Debug access port (AHB-AP)
I6_DFT = 0x05, // Device functional test / IEEE1500
I6_PRUSS_0 = 0x0e, // PRU core 0
I6_PRUSS_1 = 0x0f, // PRU core 1
I6_MEDIALB = 0x10, // Media local bus (automotive only)
// I6_WKUPM3 = 0x14, // Wakeup-M3 (connects to l4wk, not l3)
I6_EDMATC0_R = 0x18, // EDMA transfer controller 0, read port
I6_EDMATC0_W = 0x19, // EDMA transfer controller 0, write port
I6_EDMATC1_R = 0x1a, // EDMA transfer controller 1, read port
I6_EDMATC1_W = 0x1b, // EDMA transfer controller 1, write port
I6_EDMATC2_R = 0x1c, // EDMA transfer controller 2, read port
I6_EDMATC2_W = 0x1d, // EDMA transfer controller 2, write port
I6_SGX = 0x20, // SGX-530 graphics accelerator
I6_LCDC = 0x24, // LCD controller DMA
I6_EXP = 0x2c, // Expansion (not usable or non-existent)
I6_ETH = 0x30, // Ethernet DMA
I6_USB_DMA = 0x34, // USB subsystem DMA, data
I6_USB_QMGR = 0x35, // USB subsystem DMA, queue manager
// I6_PCIE = 0x3a, // PCIe bridge (non-existent)
I6_STATCOLL_0 = 0x3c, // L3 statistics collector 0
I6_STATCOLL_1 = 0x3d, // L3 statistics collector 1
I6_STATCOLL_2 = 0x3e, // L3 statistics collector 2
I6_STATCOLL_3 = 0x3f, // L3 statistics collector 3
};

I don't know yet to which initiator bwreg0 belongs, nor any details for
the statistics collectors.

Matthijs

\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.040 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site