Messages in this thread Patch in this message | | | From | "Andrew F. Davis" <> | Subject | [PATCH v2 3/3] ARM: dts: keystone-k2g: Add DSP GPIO controller node | Date | Tue, 9 Aug 2016 09:33:06 -0500 |
| |
Add the DSP GPIO controller node on K2G SoC. This is used to send interrupts to the only DSP processor subsystem present on the SoC. The IP is identical to that of the equivalent nodes on existing K2 SoCs.
Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> --- arch/arm/boot/dts/keystone-k2g.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index eccda9c..025ad12 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -106,5 +106,12 @@ #interrupt-cells = <1>; ti,syscon-dev = <&devctrl 0x2a0>; }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; }; }; -- 2.9.2
| |