lkml.org 
[lkml]   [2016]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC][PATCH 2/4] arm64: dts: Add HDMI node for hi6220-hikey
Date
From: Xinliang Liu <xinliang.liu@linaro.org>

Add adv7533 HDMI DT node for HiKey board.

Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 32 ++++++++++++++++++++++++++
1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index c2f014e..8597e9b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -379,4 +379,36 @@

&dsi {
status = "ok";
+
+ ports {
+ /* 1 for output port */
+ port@1 {
+ reg = <1>;
+
+ dsi_out0: endpoint@0 {
+ remote-endpoint = <&adv7533_in>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "ok";
+
+ adv7533: adv7533@39 {
+ compatible = "adi,adv7533";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 2>;
+ pd-gpio = <&gpio0 4 0>;
+ adi,dsi-lanes = <4>;
+
+ port {
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi_out0>;
+ };
+ };
+ };
};
--
1.9.1
\
 
 \ /
  Last update: 2016-08-09 01:41    [W:0.096 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site