lkml.org 
[lkml]   [2016]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 1/4] Documentation: mfd: LP873X: Add information for the mfd driver
Date
The lp873x series of PMICs have a bunch of regulators and a couple
of GPO(General Purpose Outputs).
Add information for the MFD and regulator drivers.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
Changes in v6:

* Added more formating for properties.

Changes in v4:

* Added the GPIO properties.

Changes in v3:

* Changed the example node lable to pmic from lp8733.

Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt

diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
new file mode 100644
index 0000000..1377c25
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
@@ -0,0 +1,59 @@
+TI LP873X PMIC MFD driver
+
+Required properties:
+ - compatible: "ti,lp8732", "ti,lp8733"
+ - reg: I2C slave address.
+ - gpio-controller: Marks the device node as a GPIO Controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ - regulators: List of child nodes that specify the regulator
+ initialization data.
+Example:
+
+pmic: lp8733@60 {
+ compatible = "ti,lp8733";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ regulators {
+ lp8733_buck0: buck0 {
+ regulator-name = "lp8733-buck0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lp8733_buck1: buck1 {
+ regulator-name = "lp8733-buck1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8733_ldo0: ldo0 {
+ regulator-name = "lp8733-ldo0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8733_ldo1: ldo1 {
+ regulator-name = "lp8733-ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
--
1.9.1
\
 
 \ /
  Last update: 2016-08-08 08:41    [W:0.358 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site