lkml.org 
[lkml]   [2016]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/6] dt-bindings: rockchip-dw-mshc: add description of rockchip,power-invert
Date
rockchip,power-invert is used for rockchip to introduce the flag
DW_MMC_CARD_PWR_INVERT from DT which should make the power control
of dw_mmc more flexible according to different hw design.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

---

Changes in v2: None

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index 07184e8..5640659 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -30,6 +30,12 @@ Optional Properties:
probing, low speeds or in case where all phases work at tuning time.
If not specified 0 deg will be used.

+* rockchip,power-invert: Invert the power control of PWREN register. If adding
+ it, the card should be in power-on state when the power io outputs high level
+ voltage, and it should be in power-off state when outputing low level voltage.
+ otherwise the behaviour of power control should be the opposite way which is
+ the default policy of dw mshc.
+
Example:

rkdwmmc0@12200000 {
--
2.3.7

\
 
 \ /
  Last update: 2016-08-07 04:21    [W:0.127 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site