lkml.org 
[lkml]   [2016]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3 v3] drm: bridge/dw-hdmi: Move edid reading to .detect() callback
On Fri, Aug 05, 2016 at 10:06:08AM +0200, Daniel Vetter wrote:
> On Fri, Aug 05, 2016 at 12:01:25AM +0100, Russell King - ARM Linux wrote:
> > On Thu, Aug 04, 2016 at 06:13:18PM +0100, Jose Abreu wrote:
> > > Hi Russell,
> > >
> > > So, I didn't use framebuffer console but used X instead and it is
> > > working as it should. I think we can drop this patch. I am now
> > > making interoperability with DVI and I am facing the following
> > > scenario:
> > > - I start the driver
> > > - An EDID is sent which tells the driver that HDMI is NOT
> > > supported;
> > > - The driver configures itself to a DVI mode;
> > >
> > > Until this point everything is working as it should. But:
> > >
> > > - Now I send an EDID which tells the driver that HDMI is
> > > supported;
> > > - As the EDID has the same preferred mode the user will not
> > > reconfigure the mode and there will be no change to HDMI mode.
> >
> > The EDID should still be read, but as you say, userspace doesn't take
> > any action because it sees that the mode parameters are still the same,
> > as you have identified.
> >
> > > The missing change to HDMI mode will cause the test to fail. The
> > > workaround that I am using is to reconfigure to another video
> > > mode and then configure to the preferred one but I think this
> > > could be fixed in the driver, right?
> >
> > This one is extremely awkward - to fix it, we would need to check to
> > see whether we reconfigure the hardware each time we read the EDID,
> > and I don't think that's a particularly nice thing to do.
> >
> > I'd like to hear what other DRM developers think about this issue.
>
> I pondored whether we should have a counter on each connector for probe
> state, which helpers would increment whenever something changes, like:
> - connector_status (as tracked by probe helpers)
> - anything in the edid changes (when setting it
> drm_mode_connector_update_edid_property)
> - other changes (like sink state changes in dpcd or whatever)
>
> That way userspace would be able to reliably spot such changes and do a
> new modeset.

Yes, please. I have had similar wishes for state changes and overall
modeset counters.
-Chris

--
Chris Wilson, Intel Open Source Technology Centre

\
 
 \ /
  Last update: 2016-08-05 11:01    [W:0.063 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site