lkml.org 
[lkml]   [2016]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3 v3] drm: bridge/dw-hdmi: Move edid reading to .detect() callback
On Thu, Aug 04, 2016 at 06:13:18PM +0100, Jose Abreu wrote:
> Hi Russell,
>
> So, I didn't use framebuffer console but used X instead and it is
> working as it should. I think we can drop this patch. I am now
> making interoperability with DVI and I am facing the following
> scenario:
> - I start the driver
> - An EDID is sent which tells the driver that HDMI is NOT
> supported;
> - The driver configures itself to a DVI mode;
>
> Until this point everything is working as it should. But:
>
> - Now I send an EDID which tells the driver that HDMI is
> supported;
> - As the EDID has the same preferred mode the user will not
> reconfigure the mode and there will be no change to HDMI mode.

The EDID should still be read, but as you say, userspace doesn't take
any action because it sees that the mode parameters are still the same,
as you have identified.

> The missing change to HDMI mode will cause the test to fail. The
> workaround that I am using is to reconfigure to another video
> mode and then configure to the preferred one but I think this
> could be fixed in the driver, right?

This one is extremely awkward - to fix it, we would need to check to
see whether we reconfigure the hardware each time we read the EDID,
and I don't think that's a particularly nice thing to do.

I'd like to hear what other DRM developers think about this issue.

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

\
 
 \ /
  Last update: 2016-08-05 02:01    [W:0.069 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site