lkml.org 
[lkml]   [2016]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 09/10] mfd: Add STMPE1600 support
On Thu, 28 Apr 2016, patrice.chotard@st.com wrote:

> From: Patrice Chotard <patrice.chotard@st.com>
>
> STMPE1600 is a 16-bit port expander.
> Datasheet is available here :
> http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/
> i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html
>
> Signed-off-by: Amelie DELAUNAY <amelie.delaunay@st.com>
> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/mfd/stmpe-i2c.c | 2 ++
> drivers/mfd/stmpe.c | 65 +++++++++++++++++++++++++++++++++++++++++++----
> drivers/mfd/stmpe.h | 21 +++++++++++++++
> include/linux/mfd/stmpe.h | 1 +
> 4 files changed, 84 insertions(+), 5 deletions(-)

If it's good enough for Linus ...

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
> index c3f4aab..863c39a 100644
> --- a/drivers/mfd/stmpe-i2c.c
> +++ b/drivers/mfd/stmpe-i2c.c
> @@ -57,6 +57,7 @@ static const struct of_device_id stmpe_of_match[] = {
> { .compatible = "st,stmpe610", .data = (void *)STMPE610, },
> { .compatible = "st,stmpe801", .data = (void *)STMPE801, },
> { .compatible = "st,stmpe811", .data = (void *)STMPE811, },
> + { .compatible = "st,stmpe1600", .data = (void *)STMPE1600, },
> { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, },
> { .compatible = "st,stmpe1801", .data = (void *)STMPE1801, },
> { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, },
> @@ -101,6 +102,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
> { "stmpe610", STMPE610 },
> { "stmpe801", STMPE801 },
> { "stmpe811", STMPE811 },
> + { "stmpe1600", STMPE1600 },
> { "stmpe1601", STMPE1601 },
> { "stmpe1801", STMPE1801 },
> { "stmpe2401", STMPE2401 },
> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index a060809..3a65331 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -532,6 +532,59 @@ static struct stmpe_variant_info stmpe610 = {
> };
>
> /*
> + * STMPE1600
> + * Compared to all others STMPE variant, LSB and MSB regs are located in this
> + * order : LSB addr
> + * MSB addr + 1
> + * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
> + */
> +
> +static const u8 stmpe1600_regs[] = {
> + [STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID,
> + [STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL,
> + [STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL,
> + [STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB,
> + [STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB,
> + [STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB,
> + [STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB,
> + [STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB,
> + [STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB,
> + [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB,
> + [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB,
> + [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB,
> +};
> +
> +static struct stmpe_variant_block stmpe1600_blocks[] = {
> + {
> + .cell = &stmpe_gpio_cell,
> + .irq = 0,
> + .block = STMPE_BLOCK_GPIO,
> + },
> +};
> +
> +static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
> + bool enable)
> +{
> + if (blocks & STMPE_BLOCK_GPIO)
> + return 0;
> + else
> + return -EINVAL;
> +}
> +
> +static struct stmpe_variant_info stmpe1600 = {
> + .name = "stmpe1600",
> + .id_val = STMPE1600_ID,
> + .id_mask = 0xffff,
> + .num_gpios = 16,
> + .af_bits = 0,
> + .regs = stmpe1600_regs,
> + .blocks = stmpe1600_blocks,
> + .num_blocks = ARRAY_SIZE(stmpe1600_blocks),
> + .num_irqs = STMPE1600_NR_INTERNAL_IRQS,
> + .enable = stmpe1600_enable,
> +};
> +
> +/*
> * STMPE1601
> */
>
> @@ -928,6 +981,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
> [STMPE610] = &stmpe610,
> [STMPE801] = &stmpe801,
> [STMPE811] = &stmpe811,
> + [STMPE1600] = &stmpe1600,
> [STMPE1601] = &stmpe1601,
> [STMPE1801] = &stmpe1801,
> [STMPE2401] = &stmpe2401,
> @@ -954,7 +1008,8 @@ static irqreturn_t stmpe_irq(int irq, void *data)
> int ret;
> int i;
>
> - if (variant->id_val == STMPE801_ID) {
> + if (variant->id_val == STMPE801_ID ||
> + variant->id_val == STMPE1600_ID) {
> int base = irq_create_mapping(stmpe->domain, 0);
>
> handle_nested_irq(base);
> @@ -1128,13 +1183,13 @@ static int stmpe_chip_init(struct stmpe *stmpe)
> return ret;
>
> if (stmpe->irq >= 0) {
> - if (id == STMPE801_ID)
> + if (id == STMPE801_ID || id == STMPE1600_ID)
> icr = STMPE_SYS_CTRL_INT_EN;
> else
> icr = STMPE_ICR_LSB_GIM;
>
> - /* STMPE801 doesn't support Edge interrupts */
> - if (id != STMPE801_ID) {
> + /* STMPE801 and STMPE1600 don't support Edge interrupts */
> + if (id != STMPE801_ID && id != STMPE1600_ID) {
> if (irq_trigger == IRQF_TRIGGER_FALLING ||
> irq_trigger == IRQF_TRIGGER_RISING)
> icr |= STMPE_ICR_LSB_EDGE;
> @@ -1142,7 +1197,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
>
> if (irq_trigger == IRQF_TRIGGER_RISING ||
> irq_trigger == IRQF_TRIGGER_HIGH) {
> - if (id == STMPE801_ID)
> + if (id == STMPE801_ID || id == STMPE1600_ID)
> icr |= STMPE_SYS_CTRL_INT_HI;
> else
> icr |= STMPE_ICR_LSB_HIGH;
> diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
> index f127342..f7efdd8 100644
> --- a/drivers/mfd/stmpe.h
> +++ b/drivers/mfd/stmpe.h
> @@ -164,6 +164,27 @@ int stmpe_remove(struct stmpe *stmpe);
> #define STMPE811_SYS_CTRL2_TS_OFF (1 << 3)
>
> /*
> + * STMPE1600
> + */
> +#define STMPE1600_ID 0x0016
> +#define STMPE1600_NR_INTERNAL_IRQS 16
> +
> +#define STMPE1600_REG_CHIP_ID 0x00
> +#define STMPE1600_REG_SYS_CTRL 0x03
> +#define STMPE1600_REG_IEGPIOR_LSB 0x08
> +#define STMPE1600_REG_IEGPIOR_MSB 0x09
> +#define STMPE1600_REG_ISGPIOR_LSB 0x0A
> +#define STMPE1600_REG_ISGPIOR_MSB 0x0B
> +#define STMPE1600_REG_GPMR_LSB 0x10
> +#define STMPE1600_REG_GPMR_MSB 0x11
> +#define STMPE1600_REG_GPSR_LSB 0x12
> +#define STMPE1600_REG_GPSR_MSB 0x13
> +#define STMPE1600_REG_GPDR_LSB 0x14
> +#define STMPE1600_REG_GPDR_MSB 0x15
> +#define STMPE1600_REG_GPPIR_LSB 0x16
> +#define STMPE1600_REG_GPPIR_MSB 0x17
> +
> +/*
> * STMPE1601
> */
>
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index 3dced4a..0170bd6 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -26,6 +26,7 @@ enum stmpe_partnum {
> STMPE610,
> STMPE801,
> STMPE811,
> + STMPE1600,
> STMPE1601,
> STMPE1801,
> STMPE2401,

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-08-04 18:01    [W:0.218 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site