lkml.org 
[lkml]   [2016]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/10] mfd: stmpe: use generic bit mask name
On Thu, 28 Apr 2016, patrice.chotard@st.com wrote:

> From: Patrice Chotard <patrice.chotard@st.com>
>
> In order to prepare the ground to STMPE1600,
> as STMPE1600's SYS_CTRL register has the same layout as
> STMPE801 variant, unify STMPExxx_REG_SYS_CTRL_RESET/INT_EN/INT_HI
> bit masks to more generic STMPE_SYS_CTRL_RESET/INT_EN/INT_HI
>
> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
> ---
> drivers/mfd/stmpe.c | 4 ++--
> drivers/mfd/stmpe.h | 6 ++----
> 2 files changed, 4 insertions(+), 6 deletions(-)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index af682d0..2556463 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -1089,7 +1089,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
>
> if (stmpe->irq >= 0) {
> if (id == STMPE801_ID)
> - icr = STMPE801_REG_SYS_CTRL_INT_EN;
> + icr = STMPE_SYS_CTRL_INT_EN;
> else
> icr = STMPE_ICR_LSB_GIM;
>
> @@ -1103,7 +1103,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
> if (irq_trigger == IRQF_TRIGGER_RISING ||
> irq_trigger == IRQF_TRIGGER_HIGH) {
> if (id == STMPE801_ID)
> - icr |= STMPE801_REG_SYS_CTRL_INT_HI;
> + icr |= STMPE_SYS_CTRL_INT_HI;
> else
> icr |= STMPE_ICR_LSB_HIGH;
> }
> diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
> index 4ae343d..4ba1123 100644
> --- a/drivers/mfd/stmpe.h
> +++ b/drivers/mfd/stmpe.h
> @@ -105,6 +105,8 @@ int stmpe_remove(struct stmpe *stmpe);
> #define STMPE_ICR_LSB_GIM (1 << 0)
>
> #define STMPE_SYS_CTRL_RESET (1 << 7)
> +#define STMPE_SYS_CTRL_INT_EN (1 << 2)
> +#define STMPE_SYS_CTRL_INT_HI (1 << 0)
>
> /*
> * STMPE801
> @@ -121,10 +123,6 @@ int stmpe_remove(struct stmpe *stmpe);
> #define STMPE801_REG_GPIO_SET_PIN 0x11
> #define STMPE801_REG_GPIO_DIR 0x12
>
> -#define STMPE801_REG_SYS_CTRL_RESET (1 << 7)
> -#define STMPE801_REG_SYS_CTRL_INT_EN (1 << 2)
> -#define STMPE801_REG_SYS_CTRL_INT_HI (1 << 0)
> -
> /*
> * STMPE811
> */

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-08-04 17:41    [W:1.491 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site