lkml.org 
[lkml]   [2016]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v3 1/2] Documentation: DT: net: Add Xilinx gmiitorgmii converter device tree binding documentation
Date
Device-tree binding documentation for xilinx gmiitorgmii converter.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v3:
--> None.
Changes for v2:
--> New patch.

.../devicetree/bindings/net/xilinx_gmii2rgmii.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt

diff --git a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt b/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt
new file mode 100644
index 0000000..79fa504
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt
@@ -0,0 +1,32 @@
+XILINX GMIITORGMII Converter Driver Device Tree Bindings
+--------------------------------------------------------
+
+The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
+Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
+Ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
+This core can be used in all three modes of operation(10/100/1000 Mb/s).
+The Management Data Input/Output (MDIO) interface is used to configure the
+Speed of operation. This core can switch dynamically between the three
+Different speed modes by configuring the conveter register through mdio write.
+
+The MDIO is a bus to which the PHY devices are connected. For each
+device that exists on this bus, a child node should be created. See
+the definition of the PHY node in booting-without-of.txt for an example
+of how to define a PHY.
+
+Required properties:
+ - compatible : Should be "xilinx,gmiitorgmii"
+ - reg : The ID number for the phy, usually a small integer
+
+Example:
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@0 {
+ ......
+ };
+ gmii_to_rgmii: gmii_to_rgmii@8 {
+ compatible = "xilinx,gmiitorgmii";
+ reg = <8>;
+ };
+ };
--
2.1.2
\
 
 \ /
  Last update: 2016-08-04 15:01    [W:0.063 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site