[lkml]   [2016]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v6 00/10] MT2701 DRM support
This is MT2701 DRM support PATCH v6, based on 4.7-rc1.
We add DSI interrupt control, transfer function for MIPI DSI panel support.
Most codes are the same, except some register changed.

For example:
- DISP_OVL address offset changed, color format definition changed.
- DISP_RDMA fifo size changed.
- DISP_COLOR offset changed.
- MIPI_TX setting changed.

We add a new component DDP_COMPONENT_BLS, and the connections are updated.
And we have shadow register support in MT2701.

Changes since v5:
- Remove DPI device tree and compatible string
- Use one wait queue to handle interrupt status
- Update the interrupt check flow and DSI_INT_ALL_BITS
- Use same function for host read/write command
- various fixes

Changes since v4:
- Add messages when timeout in mtk_disp_mutex_acquire()
- Add descriptions for DISP_REG_MUTEX registers
- Move connection settings for display modules to a separate patch
- Remove 'mt2701-disp-wdma' because it is unused
- Move cleaning up and renaming to a separate patch
- Use wait_event_interruptible_timeout() to replace polling
- Remove irq_num from mtk_dsi structure
- Remove redundant and debug codes

Changes since v3:
- Add DSI support for MIPI DSI panels
- Update BLS binding to PWM nodes
- Remove ufoe device nodes
- Remove redundant parentheses
- Remove global variable initialization

Changes since v2:
- Rename mtk_ddp_mux_sel to mtk_ddp_sout_sel
- Update mt2701_mtk_ddp_ext components
- Changed to prefix naming
- Reorder the patch series
- Use of_device_get_match_data() to get driver private data
- Use iopoll macros to implement mtk_disp_mutex_acquire()
- Removed empty device tree nodes

Changes since v1:
- Removed BLS bindings and codes, which belong to pwm driver
- Moved mtk_disp_mutex_acquire() just before mtk_crtc_ddp_config()
- Split patch into smaller parts
- Added const keyword to constant structure
- Removed codes for special memory align

The PATCH depends on the following patch: ("dt-bindings: ARM: Mediatek: Document bindings for MT2701") ("dt-bindings: pwm: Add MediaTek display PWM bindings") ("dt-bindings: mediatek: add descriptions for mediatek mt2701 iommu and smi") ("iommu/mediatek: move the common struct into header file") ("memory/mediatek: add support for mt2701") ("iommu/mediatek: add support for mtk iommu generation one HW") ("ARM: dts: mt2701: add iommu/smi dtsi node for mt2701")


YT Shen (8):
drm/mediatek: rename macros, add chip prefix
drm/mediatek: add *driver_data for different hardware settings
drm/mediatek: add shadow register support
drm/mediatek: update display module connections
drm/mediatek: cleaning up and refine
drm/mediatek: update DSI sub driver flow
drm/mediatek: add support for Mediatek SoC MT2701
arm: dts: mt2701: Add display subsystem related nodes for MT2701

shaoming chen (2):
drm/mediatek: add dsi interrupt control
drm/mediatek: add dsi transfer function

arch/arm/boot/dts/mt2701.dtsi | 86 +++++
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 32 +-
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 17 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 75 ++--
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 138 ++++++--
drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 2 +
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 34 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 14 +
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 54 ++-
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 9 +
drivers/gpu/drm/mediatek/mtk_dsi.c | 506 ++++++++++++++++++++++++---
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 71 ++--
12 files changed, 878 insertions(+), 160 deletions(-)


 \ /
  Last update: 2016-08-04 14:01    [W:0.080 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site