lkml.org 
[lkml]   [2016]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 26/46] mtd: nandsim: use the existing output macros
Date
From: Mathias Kresin <dev@kresin.me>

Without using the output macros, it isn't possible to suppress these
messages on the console by specifying an appropriate console log level.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Richard Weinberger <richard@nod.at>
---
drivers/mtd/nand/nandsim.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 838e5de..116b1d1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -957,22 +957,22 @@ static int init_nandsim(struct mtd_info *mtd, struct nandsim_params *nsparam)
if (ns->busw == 16)
NS_WARN("16-bit flashes support wasn't tested\n");

- printk("flash size: %llu MiB\n",
+ NS_INFO("flash size: %llu MiB\n",
(unsigned long long)ns->geom.totsz >> 20);
- printk("page size: %u bytes\n", ns->geom.pgsz);
- printk("OOB area size: %u bytes\n", ns->geom.oobsz);
- printk("sector size: %u KiB\n", ns->geom.secsz >> 10);
- printk("pages number: %u\n", ns->geom.pgnum);
- printk("pages per sector: %u\n", ns->geom.pgsec);
- printk("bus width: %u\n", ns->busw);
- printk("bits in sector size: %u\n", ns->geom.secshift);
- printk("bits in page size: %u\n", ns->geom.pgshift);
- printk("bits in OOB size: %u\n", ffs(ns->geom.oobsz) - 1);
- printk("flash size with OOB: %llu KiB\n",
+ NS_INFO("page size: %u bytes\n", ns->geom.pgsz);
+ NS_INFO("OOB area size: %u bytes\n", ns->geom.oobsz);
+ NS_INFO("sector size: %u KiB\n", ns->geom.secsz >> 10);
+ NS_INFO("pages number: %u\n", ns->geom.pgnum);
+ NS_INFO("pages per sector: %u\n", ns->geom.pgsec);
+ NS_INFO("bus width: %u\n", ns->busw);
+ NS_INFO("bits in sector size: %u\n", ns->geom.secshift);
+ NS_INFO("bits in page size: %u\n", ns->geom.pgshift);
+ NS_INFO("bits in OOB size: %u\n", ffs(ns->geom.oobsz) - 1);
+ NS_INFO("flash size with OOB: %llu KiB\n",
(unsigned long long)ns->geom.totszoob >> 10);
- printk("page address bytes: %u\n", ns->geom.pgaddrbytes);
- printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
- printk("options: %#x\n", ns->options);
+ NS_INFO("page address bytes: %u\n", ns->geom.pgaddrbytes);
+ NS_INFO("sector address bytes: %u\n", ns->geom.secaddrbytes);
+ NS_INFO("options: %#x\n", ns->options);

ns->bops = nsparam->bops;

--
2.8.3
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.195 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site