lkml.org 
[lkml]   [2016]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] musb: omap2430: do not assume balanced enable()/disable()
* Andreas Kemnade <andreas@kemnade.info> [160802 08:14]:
> On Tue, 2 Aug 2016 03:33:34 -0700
> Tony Lindgren <tony@atomide.com> wrote:
>
> > * Andreas Kemnade <andreas@kemnade.info> [160729 11:14]:
> > > The code assumes that omap2430_musb_enable() and
> > > omap2430_musb_disable() is called in a balanced way. The
> > > That fact is broken by the fact that musb_init_controller() calls
> > > musb_platform_disable() to switch from unknown state to off state.
> >
> > OK, some spelling issues with the above paragraph though :)
> >
> > > That means that phy_power_off() is called first so that
> > > phy->power_count gets -1 and the phy is not enabled on
> > > phy_power_on(). In the probably common case of using the
> > > phy_twl4030, that prevents also charging the battery and so makes
> > > further kernel debugging hard.
> >
> > Is this with v4.7 kernel? Also, care to describe how you hit this
> > and on which hardware? Just wondering..
>
> I got this error on the Openphoenux GTA04 phone. It has a DM3730
> SoC and a TPS65950 companion. Severe charging problems were already
> observed with the 4.4rc1. I do not know if that already was exactly
> *this* problem. I have debugged and patched the v4.7 kernel.

OK thanks for the info.

> How I hit the problem: Just boot an that device and try to charge
> via usb.

OK so it's the twl4030 charger then I guess.

> Should I resubmit the patch with an extended commit message?

Well yeah it might be worth describing that it's the twl4030
charger that otherwise does not work properly.

Regards,

Tony

\
 
 \ /
  Last update: 2016-08-03 10:21    [W:0.095 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site