lkml.org 
[lkml]   [2016]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 02/11] ARM: dts: NSP: Enable SATA and add i2c devices on XMC
    Date
    Enable SATA on bcm958625xmc and add the i2c devices present.

    Signed-off-by: Jon Mason <jon.mason@broadcom.com>
    ---
    arch/arm/boot/dts/bcm958525xmc.dts | 32 +++++++++++++++++++++++++++++++-
    1 file changed, 31 insertions(+), 1 deletion(-)

    diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
    index d257e83..a337f2d 100644
    --- a/arch/arm/boot/dts/bcm958525xmc.dts
    +++ b/arch/arm/boot/dts/bcm958525xmc.dts
    @@ -47,6 +47,24 @@
    };
    };

    +&i2c0 {
    + temperature-sensor@4c {
    + compatible = "adi,adt7461a";
    + reg = <0x4c>;
    + };
    +
    + eeprom@52 {
    + compatible = "atmel,24c02";
    + reg = <0x52>;
    + pagesize = <16>;
    + };
    +
    + rtc@68 {
    + compatible = "st,m41t81";
    + reg = <0x68>;
    + };
    +};
    +
    &nand {
    nandcs@0 {
    compatible = "brcm,nandcs";
    @@ -85,7 +103,7 @@
    };
    };

    -/* XHCI, SATA, MMC, and Ethernet support needed to be complete */
    +/* XHCI, MMC, and Ethernet support needed to be complete */

    &uart0 {
    status = "okay";
    @@ -99,6 +117,18 @@
    status = "okay";
    };

    +&sata_phy0 {
    + status = "okay";
    +};
    +
    +&sata_phy1 {
    + status = "okay";
    +};
    +
    +&sata {
    + status = "okay";
    +};
    +
    &pinctrl {
    pinctrl-names = "default";
    pinctrl-0 = <&nand_sel>;
    --
    2.7.4
    \
     
     \ /
      Last update: 2016-08-03 21:21    [W:3.346 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site