lkml.org 
[lkml]   [2016]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: dts: rockchip: add eMMC's power domain support for rk3399


On 08/27/2016 11:05 PM, Shawn Lin wrote:
> On 2016/8/27 21:41, Ziyuan Xu wrote:
>> Control power domain for eMMC via genpd to reduce power consumption.
>>
>> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
>> Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
>>
>
> It looks nice to me. But this should be merged after applying that[0]
> as your patch will break bind/unbind test for sdhci-of-arasan on rk3399
> without it[0]. Moreover, Elaine should make sure that upstreamed
> rockchip power domain stuff would not off pd for emmc, *otherwise*, I
> should update my patch to make sure we update clkmul every time when
> doing suspend 2 resume..
>
>
Forgot to say:
If use pd, Although there is no call to power odd the pd_emmc,
it will be power off when the system doing suspend 2 resume.
(Because the system call
__device_suspend_noirq->pm_genpd_suspend_noirq->rockchip_pd_power_off)

And it's important to note:
If the pd has been power off, some grf regs will be back to the default
value.(which grf regs in this pd)
So if the pd support power off , this grf regs need to save and restore
or reinit.
For example:
pd_emmc
aclk_emmc_grf

If the pd is always on,and this pd have wakeup func.
The device need to add device_init_wakeup() to make the pd always on
when the system doing suspend 2 resume.

>
> [0]: https://patchwork.kernel.org/patch/9300971/
>
>> ---
>>
>> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> index 32aebc8..71733d4 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -239,6 +239,7 @@
>> #clock-cells = <0>;
>> phys = <&emmc_phy>;
>> phy-names = "phy_arasan";
>> + power-domains = <&power RK3399_PD_EMMC>;
>> status = "disabled";
>> };
>>
>> @@ -611,6 +612,11 @@
>> status = "disabled";
>> };
>>
>> + qos_emmc: qos@ffa58000 {
>> + compatible = "syscon";
>> + reg = <0x0 0xffa58000 0x0 0x20>;
>> + };
>> +
>> qos_hdcp: qos@ffa90000 {
>> compatible = "syscon";
>> reg = <0x0 0xffa90000 0x0 0x20>;
>> @@ -739,6 +745,11 @@
>> };
>>
>> /* These power domains are grouped by VD_LOGIC */
>> + pd_emmc@RK3399_PD_EMMC {
>> + reg = <RK3399_PD_EMMC>;
>> + clocks = <&cru ACLK_EMMC>;
>> + pm_qos = <&qos_emmc>;
>> + };
>> pd_vio@RK3399_PD_VIO {
>> reg = <RK3399_PD_VIO>;
>> #address-cells = <1>;
>>
>
>

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.112 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site