lkml.org 
[lkml]   [2016]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] power: bq24735-charger: Assume not charging when charger is missing
Date
When the charger is missing (disconnected), it is safe to assume that
the charger chip is no charging.

This is especially relevant when a status GPIO is present and the
charger is getting disconnected. bq24735_charger_is_charging will be
triggered due to the interrupt then, it will attempt to read whether it
is charging through i2c, which will fail as the charger is disconnected.

This also fixes that specific issue.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
drivers/power/bq24735-charger.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/power/bq24735-charger.c b/drivers/power/bq24735-charger.c
index 361a047..0b5b247 100644
--- a/drivers/power/bq24735-charger.c
+++ b/drivers/power/bq24735-charger.c
@@ -201,8 +201,12 @@ static bool bq24735_charger_is_present(struct bq24735 *charger)

static int bq24735_charger_is_charging(struct bq24735 *charger)
{
- int ret = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
+ int ret;
+
+ if (!bq24735_charger_is_present(charger))
+ return 0;

+ ret = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
if (ret < 0)
return ret;

--
2.9.3
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.033 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site