lkml.org 
[lkml]   [2016]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: rockchip: fix the address map for WDT0 and WDT1
From
Date
On 2016/8/26 14:22, Xing Zheng wrote:
> Dues to incorrect description in the TRM, the WDTs base address
> should be fixed and swap them like this:
> WDT0 - 0xff848000
> WDT1 - 0xff840000
>
> And, it is right that only WDT0 can generate global software reset.
> We will update the TRM to fix it.
>
> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
> ---
>
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index bc86e8c..f0f52c1 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -1002,9 +1002,9 @@
> };
> };
>
> - watchdog@ff840000 {
> + watchdog@ff848000 {

Just a nit, should we mark this explicitly as "watchdog0" ?
I still need to look up for which wdt you are using.:)

> compatible = "snps,dw-wdt";
> - reg = <0x0 0xff840000 0x0 0x100>;
> + reg = <0x0 0xff848000 0x0 0x100>;
> clocks = <&cru PCLK_WDT>;
> interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> };
>


--
Best Regards
Shawn Lin

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.442 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site