lkml.org 
[lkml]   [2016]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] phy: rcar-gen3-usb2: Add a compatible string for r8a7796
Date
This driver can support for r8a7796 SoC. So, this patch adds it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 ++
drivers/phy/phy-rcar-gen3-usb2.c | 1 +
2 files changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index b54fb36..ace9cce 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -6,6 +6,8 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
+ "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
+ SoC.
"renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.

When compatible with the generic version, nodes must list the
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 31156c9..3d97ead 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -280,6 +280,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)

static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{ .compatible = "renesas,usb2-phy-r8a7795" },
+ { .compatible = "renesas,usb2-phy-r8a7796" },
{ .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
};
--
1.9.1
\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.728 / U:1.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site