lkml.org 
[lkml]   [2016]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 3/8] i2c: thunderx: Add i2c driver for ThunderX SOC
On Tue, Aug 23, 2016 at 10:36:29PM +0200, Wolfram Sang wrote:
>
> > i2c-octeon-objs := i2c-cavium.o i2c-octeon-core.o
> > obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
> > +i2c-thunderx-objs := i2c-cavium.o i2c-thunderx-core.o
> > +obj-$(CONFIG_I2C_THUNDERX) += i2c-thunderx.o
>
> Shouldn't that rather be "i2c-cavium-core.o", "i2c-octeon-platdrv.o",
> and "i2c-thunderx-pcidrv.o" for the -objs? I mean, the cavium part is
> the core-part...
>
> > +skip:
> > + if (!i2c->sys_freq)
> > + i2c->sys_freq = SYS_FREQ_DEFAULT;
> > +
> > + dev_info(dev, "Set system clock to %u\n", i2c->sys_freq);
>
> Too many dev_info IMO, see later.

OK. I was working on an update where I dropped most of the messages.

> > + i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
>
> Do you really need that?

Not sure, just copy'n paste from what most of the other bus drivers do.
Looking at i2c-core.c it might be a legacy thing, so I can probably
remove it.

> > + ret = i2c_add_adapter(&i2c->adap);
> > + if (ret < 0) {
> > + dev_err(dev, "Failed to add i2c adapter\n");
>
> I2C core does error reporting for you meanwhile.

OK.

> > + goto out_irq;
> > + }
> > +
> > + dev_info(i2c->dev, "probed\n");
>
> I'd think all nice to know dev_info should go here in condensed form.
>
> > +out_irq:
> > + devm_free_irq(dev, i2c->i2c_msix.vector, i2c);
>
> If you need to free irq manually here anyhow, then you don't need the
> devm variant.

Yes. I paid attention to the devm documentation in the meantime and
switched all probing to the managed fucntions and got rid of the goto's
completely.

> > +out_msix:
> > + pci_disable_msix(pdev);
> > +out_unmap:
> > + iounmap(i2c->twsi_base);
> > + thunder_i2c_clock_disable(dev, i2c->clk);
> > +out_release_regions:
> > + pci_release_regions(pdev);
> > +out_disable_device:
> > + pci_disable_device(pdev);
> > +out_free_i2c:
> > + pci_set_drvdata(pdev, NULL);
>
> Similar to devm_*, there is also pcim_* for PCI devices. You might want
> to have a look for those.

See above.

> > + devm_kfree(dev, i2c);
>
> Not needed.

Yes.

> > + return ret;
> > +}
> > +
> > +static void thunder_i2c_remove_pci(struct pci_dev *pdev)
> > +{
> > + struct octeon_i2c *i2c = pci_get_drvdata(pdev);
> > + struct device *dev;
> > +
> > + if (!i2c)
> > + return;
>
> How should that happen?

Just a safety net, can be removed.

> > +
> > +module_pci_driver(thunder_i2c_pci_driver);
> > +
> > +MODULE_LICENSE("GPL");
>
> Please add a minimal GPL header at the top of the file, so it is clear
> if you mean "v2" or "v2 or later".

OK.

> > +MODULE_AUTHOR("Fred Martin <fmartin@caviumnetworks.com>");
> > +MODULE_DESCRIPTION("I2C-Bus adapter for Cavium ThunderX SOC");
> > --
> > 1.9.1
> >


\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.149 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site