lkml.org 
[lkml]   [2016]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines
On Tue, Aug 23, 2016 at 10:27:59AM -0500, Andrew F. Davis wrote:
> On 08/23/2016 01:16 AM, Vignesh R wrote:
> > Add a driver to read group of GPIO lines and provide its status as a
> > numerical value as input event to the system. This will help in
> > intefacing devices, that can be connected over GPIOs, that provide input
> > to the system by driving GPIO lines connected to them like a rotary dial
> > or a switch.
> >
> > For example, a rotary switch can be connected to four GPIO lines. The
> > status of the GPIO lines reflect the actual position of the rotary
> > switch dial. For example, if dial points to 9, then the four GPIO lines
> > connected to the switch will read HLLH(0b'1001 = 9). This value
> > can be reported as an ABS_* event to the input subsystem.
> >
> > Signed-off-by: Vignesh R <vigneshr@ti.com>
> > Acked-by: Rob Herring <robh@kernel.org>
> > ---
> >
> > v2: Use decoder,max-value instead of gpio-decoder,max-value.

That's not what Rob asked for. "decoder-max-value", not "decoder" vendor
prefix.

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.083 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site