lkml.org 
[lkml]   [2016]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] phy: micrel: Reenable interrupts during on resume for ksz9031
On 8/22/2016 3:43 PM, Xander Huff wrote:
> Like the ksz8081, the ksz9031 has the behavior where it will clear the interrupt
> enable bits when leaving power down. This takes advantage of the solution
> provided by f5aba91.
>
> Signed-off-by: Xander Huff <xander.huff@ni.com>
> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
> Natinst-ReviewBoard-ID: 149877
> ---
> drivers/net/phy/micrel.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 053e879..885ac9c 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -964,7 +964,7 @@ static struct phy_driver ksphy_driver[] = {
> .get_strings = kszphy_get_strings,
> .get_stats = kszphy_get_stats,
> .suspend = genphy_suspend,
> - .resume = genphy_resume,
> + .resume = kszphy_resume,
> }, {
> .phy_id = PHY_ID_KSZ8873MLL,
> .phy_id_mask = MICREL_PHY_ID_MASK,
>
Please disregard this patch as it was accidentally sent. Please instead refer to
my subsequent email with the subject:
"[PATCH] phy: micrel: Reenable interrupts during resume for ksz9031"

--
Xander Huff
Staff Software Engineer
National Instruments

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.050 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site