lkml.org 
[lkml]   [2016]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/9] mfd: axp20x: Add bindings for AXP806 PMIC
Date
This patch adds the basic and regulator bindings for the X-Powers AXP809
PMIC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 28 ++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 585a95546288..8f3ad9ab4637 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -10,7 +10,8 @@ axp809 (X-Powers)

Required properties:
- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
- "x-powers,axp221", "x-powers,axp223", "x-powers,axp809"
+ "x-powers,axp221", "x-powers,axp223", "x-powers,axp806",
+ "x-powers,axp809"
- reg: The I2C slave address or RSB hardware address for the AXP chip
- interrupt-parent: The parent interrupt controller
- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
@@ -47,7 +48,6 @@ Optional properties for DCDC regulators:
probably makes sense for HiFi audio related
applications that aren't battery constrained.

-
AXP202/AXP209 regulators, type, and corresponding input supply names:

Regulator Type Supply Name Notes
@@ -86,6 +86,30 @@ LDO_IO1 : LDO : ips-supply : GPIO 1
RTC_LDO : LDO : ips-supply : always on
DRIVEVBUS : Enable output : drivevbus-supply : external regulator

+AXP806 regulators, type, and corresponding input supply names:
+
+Regulator Type Supply Name Notes
+--------- ---- ----------- -----
+DCDCA : DC-DC buck : vina-supply : poly-phase capable
+DCDCB : DC-DC buck : vinb-supply : poly-phase capable
+DCDCC : DC-DC buck : vinc-supply : poly-phase capable
+DCDCD : DC-DC buck : vind-supply : poly-phase capable
+DCDCE : DC-DC buck : vine-supply : poly-phase capable
+ALDO1 : LDO : aldoin-supply : shared supply
+ALDO2 : LDO : aldoin-supply : shared supply
+ALDO3 : LDO : aldoin-supply : shared supply
+BLDO1 : LDO : bldoin-supply : shared supply
+BLDO2 : LDO : bldoin-supply : shared supply
+BLDO3 : LDO : bldoin-supply : shared supply
+BLDO4 : LDO : bldoin-supply : shared supply
+CLDO1 : LDO : cldoin-supply : shared supply
+CLDO2 : LDO : cldoin-supply : shared supply
+CLDO3 : LDO : cldoin-supply : shared supply
+SW : On/Off Switch : swin-supply
+
+Additionally, the AXP806 DC-DC regulators support poly-phase arrangements
+for higher output current. The possible groupings are: A+B, A+B+C, D+E.
+
AXP809 regulators, type, and corresponding input supply names:

Regulator Type Supply Name Notes
--
2.9.3
\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.101 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site