lkml.org 
[lkml]   [2016]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1188/1285] Replace numeric parameter like 0444 with macro
Date
I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Baole Ni <baolex.ni@intel.com>
---
sound/isa/opl3sa2.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index ae13363..33e8c30 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -59,33 +59,33 @@ static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 1,3,5,6,7 */
static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 1,3,5,6,7 */
static int opl3sa3_ymode[SNDRV_CARDS]; /* 0,1,2,3 */ /*SL Added*/

-module_param_array(index, int, NULL, 0444);
+module_param_array(index, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(index, "Index value for OPL3-SA soundcard.");
-module_param_array(id, charp, NULL, 0444);
+module_param_array(id, charp, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(id, "ID string for OPL3-SA soundcard.");
-module_param_array(enable, bool, NULL, 0444);
+module_param_array(enable, bool, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(enable, "Enable OPL3-SA soundcard.");
#ifdef CONFIG_PNP
-module_param_array(isapnp, bool, NULL, 0444);
+module_param_array(isapnp, bool, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
-module_param_array(port, long, NULL, 0444);
+module_param_array(port, long, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(port, "Port # for OPL3-SA driver.");
-module_param_array(sb_port, long, NULL, 0444);
+module_param_array(sb_port, long, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(sb_port, "SB port # for OPL3-SA driver.");
-module_param_array(wss_port, long, NULL, 0444);
+module_param_array(wss_port, long, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(wss_port, "WSS port # for OPL3-SA driver.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_array(fm_port, long, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(fm_port, "FM port # for OPL3-SA driver.");
-module_param_array(midi_port, long, NULL, 0444);
+module_param_array(midi_port, long, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(midi_port, "MIDI port # for OPL3-SA driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_array(irq, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(irq, "IRQ # for OPL3-SA driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_array(dma1, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(dma1, "DMA1 # for OPL3-SA driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_array(dma2, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(dma2, "DMA2 # for OPL3-SA driver.");
-module_param_array(opl3sa3_ymode, int, NULL, 0444);
+module_param_array(opl3sa3_ymode, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(opl3sa3_ymode, "Speaker size selection for 3D Enhancement mode: Desktop/Large Notebook/Small Notebook/HiFi.");

#ifdef CONFIG_PNP
--
2.9.2
\
 
 \ /
  Last update: 2016-08-02 17:01    [W:0.027 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site