lkml.org 
[lkml]   [2016]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: musb: am3358: having problem with high-speed on usb1 at peripheral
Hi,

On Fri, Aug 12, 2016 at 10:23:15AM +0800, ayaka wrote:
> Hello all:
> I recently add a support for customize am3358 board using the branch
> processor-sdk-linux-03.00.00 from Ti git. But I meet a problem with musb
> at the peripheral mode.
> I have force usb1 in peripheral mode in dts as it only have USB_DP,
> USB_DM and USBDRV connected. I start up a ether gadget using the configfs,

Do you mean USB1_DRVVBUS pin? If so, you have wrong hw design. For
peripheral mode, you should float this pin, but connect USB1_VBUS pin
instead.

Regards,
-Bin.

> But I found it would always work on the USB 2.0 full speed mode,
> even the testmode can't force it in high speed mode or it won't appear
> at host side. If I want it work at high speed mode, what should I do?
> I also meet the DMA problem, I have to apply the "ARM: dts: am33xx:
> fix DMA support for the second USB interface", but does patches really
> work? Although it make the error message disapear, but the mail list
> said the just make the usb back to PIO mode.
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.157 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site