lkml.org 
[lkml]   [2016]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] serial: 8250_fintek: Fix potential NULL pointer dereference
Hi Peter

Somehow this patch entered my mail limbo. Sorry about that.

Could you remove the brackets on the if/else? I think that for one
liners they are not recommended.

Also, I think it might be a good a idea to remove the __func__ from
the dev_warn.

Best regards!



On Tue, Jun 28, 2016 at 3:46 AM, Ji-Ze Hong (Peter Hong)
<hpeter@gmail.com> wrote:
> Fix potential NULL pointer dereference on
> 'commit 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode")'
>
> We try to fix IRQ mode mismatch issue and add the following code to
> detect IRQ Level or Edge mode.
>
> struct irq_data *irq_data = irq_get_irq_data(uart->port.irq);
> bool level_mode = irqd_is_level_type(irq_data);
>
> But *irq_data had not any check and pass to irqd_is_level_type(),
> it may lead to potential NULL pointer dereference.
>
> Also modify detecting IRQ mode when fintek chip found.
>
> Suggested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
> ---
> drivers/tty/serial/8250/8250_fintek.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
> index 737b4b3..9119d0c 100644
> --- a/drivers/tty/serial/8250/8250_fintek.c
> +++ b/drivers/tty/serial/8250/8250_fintek.c
> @@ -212,8 +212,8 @@ int fintek_8250_probe(struct uart_8250_port *uart)
> {
> struct fintek_8250 *pdata;
> struct fintek_8250 probe_data;
> - struct irq_data *irq_data = irq_get_irq_data(uart->port.irq);
> - bool level_mode = irqd_is_level_type(irq_data);
> + struct irq_data *irq_data;
> + bool level_mode = false; /* Default to Edge/High */
>
> if (find_base_port(&probe_data, uart->port.iobase))
> return -ENODEV;
> @@ -226,5 +226,14 @@ int fintek_8250_probe(struct uart_8250_port *uart)
> uart->port.rs485_config = fintek_8250_rs485_config;
> uart->port.private_data = pdata;
>
> + irq_data = irq_get_irq_data(uart->port.irq);
> + if (irq_data) {
> + level_mode = irqd_is_level_type(irq_data);
> + } else {
> + dev_warn(uart->port.dev,
> + "%s: Can't get irq_data, set this port to Edge/High",
> + __func__);
> + }
> +
> return fintek_8250_set_irq_mode(pdata, level_mode);
> }
> --
> 1.9.1
>



--
Ricardo Ribalda

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.060 / U:4.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site