lkml.org 
[lkml]   [2016]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [LKP] [lkp] 8700e3e7c4: BUG: unable to handle kernel NULL pointer dereference at 000001fc
Date
Yonatan Cohen <yonatanc@mellanox.com> writes:

>> -----Original Message-----
>> From: lkp-request@eclists.intel.com [mailto:lkp-request@eclists.intel.com] On Behalf Of kernel test robot
>> Sent: Monday, August 15, 2016 7:40 AM
>> To: Moni Shoua <monis@mellanox.com>
>> Cc: Doug Ledford <dledford@redhat.com>; Kamal Heib
>> <kamalh@mellanox.com>; Amir Vadai (revoke on 17.10.15)
>> <amirv@mellanox.com>; Haggai Eran <haggaie@mellanox.com>; LKML
>> <linux-kernel@vger.kernel.org>; Linus Torvalds
>> <torvalds@linux-foundation.org>; lkp@01.org
>> Subject: [lkp] 8700e3e7c4: BUG: unable to handle kernel NULL pointer dereference at 000001fc
>>
>>
>> FYI, we noticed the following commit:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master commit 8700e3e7c4857d28ebaa824509934556da0b3e76 ("Soft RoCE driver")
>>
>> in testcase: boot
>>
>> on test machine: 1 threads qemu-system-i386 -enable-kvm with 256M memory
>>
>> caused below changes:
>>
>>
>> +-----------------------------------------------------+----------+------------+
>> | | v4.7-rc4 |
>> | 8700e3e7c4 |
>> +-----------------------------------------------------+----------+------------+
>> | boot_successes | 15 | 0 |
>> | boot_failures | 10 | 18 |
>> | invoked_oom-killer:gfp_mask=0x | 1 | |
>> | Mem-Info | 1 | |
>> | INFO:task_blocked_for_more_than#seconds | 2 | |
>> | EIP_is_at__default_send_IPI_dest_field | 2 | |
>> | Kernel_panic-not_syncing:hung_task:blocked_tasks | 2 | |
>> | backtrace:torture_shuffle | 2 | |
>> | WARNING:at_arch/x86/mm/dump_pagetables.c:#note_page | 7 | |
>> | backtrace:mark_rodata_ro | 7 | |
>> | BUG:unable_to_handle_kernel | 0 | 18 |
>> | Oops | 0 | 18 |
>> | EIP_is_at_setup_udp_tunnel_sock | 0 | 18 |
>> | Kernel_panic-not_syncing:Fatal_exception | 0 | 18 |
>> | backtrace:rxe_net_init | 0 | 18 |
>> | backtrace:rxe_module_init | 0 | 18 |
>> | backtrace:kernel_init_freeable | 0 | 18 |
>> +-----------------------------------------------------+----------+------------+
>>
>>
>>
>> [ 46.816381] usnic_verbs:usnic_uiom_init:581: IOMMU required but not present or enabled. USNIC QPs will not function w/o enabling IOMMU
>> [ 46.835874] usnic_verbs:usnic_ib_init:647: Unable to initalize umem with err -1
>> [ 46.864766] iscsi: registered transport (iser)
>> [ 46.884623] BUG: unable to handle kernel NULL pointer dereference at 000001fc
>> [ 46.888632] IP: [<c220705a>] setup_udp_tunnel_sock+0x6/0x4f
>> [ 46.891355] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
>> [ 46.893918] Oops: 0002 [#1] PREEMPT
>> [ 46.896014] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc4-00001-g8700e3e #1
>> [ 46.900280] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
>> [ 46.904905] task: cf06c040 ti: cf05e000 task.ti: cf05e000
>> [ 46.907854] EIP: 0060:[<c220705a>] EFLAGS: 00210246 CPU: 0
>> [ 46.911137] EIP is at setup_udp_tunnel_sock+0x6/0x4f
>> [ 46.914070] EAX: 00000044 EBX: 00000001 ECX: cf05fef0 EDX: ca8142e0
>> [ 46.917236] ESI: c2c4505b EDI: cf05fef0 EBP: cf05fed0 ESP: cf05fed0
>> [ 46.919836] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
>> [ 46.922046] CR0: 80050033 CR2: 000001fc CR3: 02cec000 CR4: 000006b0
>> [ 46.924550] Stack:
>> [ 46.926014] cf05ff10 c1fd4657 ca8142e0 0000000a 00000000 00000000 0000b712 00000008
>> [ 46.931274] 00000000 6bb5bd01 c1fd48de 00000000 00000000 cf05ff1c 00000000 00000000
>> [ 46.936122] cf05ff1c c1fd4bdf 00000000 cf05ff28 c2c4507b ffffffff cf05ff88 c2bf1c74
>> [ 46.942350] Call Trace:
>> [ 46.944403] [<c1fd4657>] rxe_setup_udp_tunnel+0x8f/0x99
>> [ 46.947689] [<c1fd48de>] ? net_to_rxe+0x4e/0x4e
>> [ 46.950567] [<c1fd4bdf>] rxe_net_init+0xe/0xa4
>> [ 46.953147] [<c2c4507b>] rxe_module_init+0x20/0x4c
>> [ 46.955448] [<c2bf1c74>] do_one_initcall+0x89/0x113
>> [ 46.957797] [<c2bf15eb>] ? set_debug_rodata+0xf/0xf
>> [ 46.959966] [<c2bf1dbc>] ? kernel_init_freeable+0xbe/0x15b
>> [ 46.962262] [<c2bf1ddc>] kernel_init_freeable+0xde/0x15b
>> [ 46.964418] [<c232eb54>] kernel_init+0x8/0xd0
>> [ 46.966618] [<c2333122>] ret_from_kernel_thread+0xe/0x24
>> [ 46.969592] [<c232eb4c>] ? rest_init+0x6f/0x6f
>> [ 46.973288] Code: 80 04 f7 ff c7 06 00 00 00 00 89 d8 8b 75 f0 65
>> 33 35 14 00 00 00 74 05 e8 3a 1f e6 fe 8d 65 f4 5b 5e 5f 5d c3 55 8b
>> 42 14 89 e5 <80> a0 b8 01 00 00 ef fe 80 bb 01 00 00 8b 11 89 90 60
>> 01 00 00
>> [ 46.991320] EIP: [<c220705a>] setup_udp_tunnel_sock+0x6/0x4f SS:ESP 0068:cf05fed0
>> [ 46.995035] CR2: 00000000000001fc
>> [ 46.996817] ---[ end trace 1be5f94d2ecf9b78 ]---
>> [ 47.001073] Kernel panic - not syncing: Fatal exception
>>
>>
>> FYI, raw QEMU command line is:
>>
>> qemu-system-i386 -enable-kvm -kernel
>> /pkg/linux/i386-randconfig-c0-08121125/gcc-4.9/8700e3e7c4857d28ebaa824509934556da0b3e76/vmlinuz-4.7.0-rc4-00001-g8700e3e
>> -append 'ip=::::vm-intel12-openwrt-i386-1::dhcp root=/dev/ram0
>> user=lkp
>> job=/lkp/scheduled/vm-intel12-openwrt-i386-1/boot-1-openwrt-i386.cgz-8700e3e7c4857d28ebaa824509934556da0b3e76-20160812-54756-6to0wa-0.yaml
>> ARCH=i386 kconfig=i386-randconfig-c0-08121125 branch=linus/master
>> commit=8700e3e7c4857d28ebaa824509934556da0b3e76
>> BOOT_IMAGE=/pkg/linux/i386-randconfig-c0-08121125/gcc-4.9/8700e3e7c4857d28ebaa824509934556da0b3e76/vmlinuz-4.7.0-rc4-00001-g8700e3e
>> max_uptime=600
>> RESULT_ROOT=/result/boot/1/vm-intel12-openwrt-i386/openwrt-i386.cgz/i386-randconfig-c0-08121125/gcc-4.9/8700e3e7c4857d28ebaa824509934556da0b3e76/0
>> LKP_SERVER=inn debug apic=debug sysrq_always_enabled
>> rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1
>> nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0
>> systemd.log_level=err ignore_loglevel ea
> rlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw
> drbd.minor_count=8' -initrd /fs/KVM/initrd-vm-intel12-openwrt-i386-1
> -m 256 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot
> order=nc -no-reboot -watchdog i6300esb -watchdog-action debug -rtc
> base=localtime -drive
> file=/fs/KVM/disk0-vm-intel12-openwrt-i386-1,media=disk,if=virtio
> -drive
> file=/fs/KVM/disk1-vm-intel12-openwrt-i386-1,media=disk,if=virtio
> -pidfile /dev/shm/kboot/pid-vm-intel12-openwrt-i386-1 -serial
> file:/dev/shm/kboot/serial-vm-intel12-openwrt-i386-1 -daemonize
> -display none -monitor null
>>
>>
>>
>>
>>
>> Thanks,
>> Xiaolong
>>
> can you please provide more info to help reproduced this crash ?
> on which operating system did this happen ?
> which HCA device was the rxe device attached to ? mlx4 or mlx5 ?
> thanks

The test is done in virtual machine. And it failed during boot stage,
so I think the root file system is not relevant. And there are no rxe
device in the virtual machine. So I guess your driver init code may not
run properly when compiled builtin and without the real device.

Best Regards,
Huang, Ying

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.049 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site