lkml.org 
[lkml]   [2016]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 6/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
    Date
    This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
    This board fully support the all things for mobile target.

    This patch supports the following devices:
    1. basic SoC
    - Initial booting for Samsung Exynos5433 SoC
    - DRAM LPDDR3 (3GB)
    - eMMC (32GB)
    - ARM architecture timer

    2. power management devices
    - Sasmung S2MPS13 PMIC for the power supply
    - CPUFREQ for big.LITTLE cores
    - TMU for big.LITTLE cores and GPU
    - ADC with thermistor to measure the temperature of AP/Battery/Charger
    - Maxim MAX77843 Interface PMIC (MUIC/Fuel-gauge/Charger/Haptic/LED/Regulator)

    3. sound devices
    - I2S for sound bus
    - LPASS for sound power control
    - Wolfson WM5110 for sound codec
    - Maxim MAX98504 for speaker amplifier
    - TM2 ASoC Machine device driver node

    3. display devices
    - DECON, DSI and MIC for the panel output

    4. usb devices
    - USB 3.0 DRD (Dual Role Device)
    - USB 3.0 Host controller

    5. storage devices
    - MSHC (obile Storae Host Controller) for eMMC device

    6. misc devices
    - gpio-keys (power, volume up/down, home key)
    - PWM (Pulse Width Modulation Timer)

    Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
    Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
    Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
    Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
    Signed-off-by: Inki Dae <inki.dae@samsung.com>
    Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
    Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
    Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
    Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
    Signed-off-by: Inha Song <ideal.song@samsung.com>
    Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
    Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
    Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
    Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
    Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
    ---
    .../bindings/arm/samsung/samsung-boards.txt | 1 +
    arch/arm64/boot/dts/exynos/Makefile | 5 +-
    arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1003 ++++++++++++++++++++
    3 files changed, 1008 insertions(+), 1 deletion(-)
    create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts

    diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
    index 0ea7f14ef294..c704b4bf6137 100644
    --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
    +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
    @@ -15,6 +15,7 @@ Required root node properties:
    - "samsung,xyref5260" - for Exynos5260-based Samsung board.
    - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
    - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
    + - "samsung,tm2" - for Exynos5333-based Samsung TM2 board.
    - "samsung,sd5v1" - for Exynos5440-based Samsung board.
    - "samsung,ssdk5440" - for Exynos5440-based Samsung board.

    diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
    index 50c9b9383cfa..7ddea53769a7 100644
    --- a/arch/arm64/boot/dts/exynos/Makefile
    +++ b/arch/arm64/boot/dts/exynos/Makefile
    @@ -1,4 +1,7 @@
    -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
    +dtb-$(CONFIG_ARCH_EXYNOS) += \
    + exynos5433-tm2.dtb \
    + exynos5433-tm2e.dtb \
    + exynos7-espresso.dtb

    always := $(dtb-y)
    subdir-y := $(dts-dirs)
    diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
    new file mode 100644
    index 000000000000..3e497b0d0015
    --- /dev/null
    +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
    @@ -0,0 +1,1003 @@
    +/*
    + * SAMSUNG Exynos5433 TM2 board device tree source
    + *
    + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
    + *
    + * Device tree source file for Samsung's TM2 board which is based on
    + * Samsung Exynos5433 SoC.
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License version 2 as
    + * published by the Free Software Foundation.
    + */
    +
    +/dts-v1/;
    +#include "exynos5433.dtsi"
    +#include <dt-bindings/gpio/gpio.h>
    +#include <dt-bindings/input/input.h>
    +
    +/ {
    + model = "Samsung TM2 board";
    + compatible = "samsung,exynos5433-tm2", "samsung,exynos5433";
    +
    + aliases {
    + i2c0 = &hsi2c_0;
    + i2c1 = &hsi2c_1;
    + i2c2 = &hsi2c_2;
    + i2c3 = &hsi2c_3;
    + i2c4 = &hsi2c_4;
    + i2c5 = &hsi2c_5;
    + i2c6 = &hsi2c_6;
    + i2c7 = &hsi2c_7;
    + i2c8 = &hsi2c_8;
    + i2c9 = &hsi2c_9;
    + i2c10 = &hsi2c_10;
    + i2c11 = &hsi2c_11;
    + mshc0 = &mshc_0;
    + mshc1 = &mshc_1;
    + mshc2 = &mshc_2;
    + pinctrl0 = &pinctrl_alive;
    + pinctrl1 = &pinctrl_aud;
    + pinctrl2 = &pinctrl_cpif;
    + pinctrl3 = &pinctrl_ese;
    + pinctrl4 = &pinctrl_finger;
    + pinctrl5 = &pinctrl_fsys;
    + pinctrl6 = &pinctrl_imem;
    + pinctrl7 = &pinctrl_nfc;
    + pinctrl8 = &pinctrl_peric;
    + pinctrl9 = &pinctrl_touch;
    + serial0 = &serial_0;
    + serial1 = &serial_1;
    + serial2 = &serial_2;
    + serial3 = &serial_3;
    + spi0 = &spi_0;
    + spi1 = &spi_1;
    + spi2 = &spi_2;
    + spi3 = &spi_3;
    + spi4 = &spi_4;
    + usbdrdphy0 = &usbdrd30_phy;
    + };
    +
    + chosen {
    + stdout-path = &serial_1;
    + };
    +
    + memory@20000000 {
    + device_type = "memory";
    + reg = <0x0 0x20000000 0x0 0xc0000000>;
    + };
    +
    + gpio_keys {
    + compatible = "gpio-keys";
    +
    + power_key {
    + gpios = <&gpa2 7 1>;
    + linux,code = <KEY_POWER>;
    + label = "power key";
    + debounce-interval = <10>;
    + gpio-key,wakeup;
    + };
    +
    + volume_up_key {
    + gpios = <&gpa2 0 1>;
    + linux,code = <KEY_VOLUMEUP>;
    + label = "volume-up key";
    + debounce-interval = <10>;
    + };
    +
    + volume_down_key {
    + gpios = <&gpa2 1 1>;
    + linux,code = <KEY_VOLUMEDOWN>;
    + label = "volume-down key";
    + debounce-interval = <10>;
    + };
    +
    + homepage_key {
    + gpios = <&gpa0 3 1>;
    + linux,code = <KEY_MENU>;
    + label = "homepage key";
    + debounce-interval = <10>;
    + };
    + };
    +
    + i2c_max98504: i2c-gpio-0 {
    + compatible = "i2c-gpio";
    + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
    + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
    + i2c-gpio,delay-us = <2>;
    + #address-cells = <1>;
    + #size-cells = <0>;
    + status = "okay";
    +
    + max98504: max98504@31 {
    + compatible = "maxim,max98504";
    + reg = <0x31>;
    + maxim,rx-path = <1>;
    + maxim,tx-path = <1>;
    + maxim,tx-channel-mask = <3>;
    + maxim,tx-channel-source = <2>;
    + };
    + };
    +
    + sound {
    + compatible = "samsung,tm2-audio";
    + audio-codec = <&wm5110>;
    + i2s-controller = <&i2s0>;
    + audio-amplifier = <&max98504>;
    + mic-bias-gpios = <&gpr3 2 0>;
    + model = "wm5110";
    + samsung,audio-routing =
    + /* Headphone */
    + "HP", "HPOUT1L",
    + "HP", "HPOUT1R",
    +
    + /* Speaker */
    + "SPK", "SPKOUT",
    + "SPKOUT", "HPOUT2L",
    + "SPKOUT", "HPOUT2R",
    +
    + /* Receiver */
    + "RCV", "HPOUT3L",
    + "RCV", "HPOUT3R";
    + status = "okay";
    + };
    +};
    +
    +&adc {
    + vdd-supply = <&ldo3_reg>;
    + status = "okay";
    +
    + thermistor-ap {
    + compatible = "ntc,ncp03wf104";
    + pullup-uv = <1800000>;
    + pullup-ohm = <100000>;
    + pulldown-ohm = <0>;
    + io-channels = <&adc 0>;
    + };
    +
    + thermistor_battery: thermistor-battery {
    + compatible = "ntc,ncp03wf104";
    + pullup-uv = <1800000>;
    + pullup-ohm = <100000>;
    + pulldown-ohm = <0>;
    + io-channels = <&adc 1>;
    + #thermal-sensor-cells = <0>;
    + };
    +
    + thermistor-charger {
    + compatible = "ntc,ncp03wf104";
    + pullup-uv = <1800000>;
    + pullup-ohm = <100000>;
    + pulldown-ohm = <0>;
    + io-channels = <&adc 2>;
    + };
    +};
    +
    +&cpu0 {
    + cpu-supply = <&buck3_reg>;
    +};
    +
    +&cpu4 {
    + cpu-supply = <&buck2_reg>;
    +};
    +
    +&decon {
    + status = "okay";
    + iommu-reserved-mapping = <0x20000000 0x20000000 0xc0000000>;
    +
    + i80-if-timings {
    + };
    +};
    +
    +&dsi {
    + status = "okay";
    + vddcore-supply = <&ldo6_reg>;
    + vddio-supply = <&ldo7_reg>;
    + samsung,pll-clock-frequency = <24000000>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&te_irq>;
    +
    + ports {
    + #address-cells = <1>;
    + #size-cells = <0>;
    +
    + port@1 {
    + reg = <1>;
    +
    + dsi_out: endpoint {
    + samsung,burst-clock-frequency = <512000000>;
    + samsung,esc-clock-frequency = <16000000>;
    + };
    + };
    + };
    +};
    +
    +&hsi2c_0 {
    + status = "okay";
    + clock-frequency = <2500000>;
    +
    + s2mps13_pmic@66 {
    + compatible = "samsung,s2mps13-pmic";
    + interrupt-parent = <&gpa0>;
    + interrupts = <7 0>;
    + reg = <0x66>;
    + wakeup;
    + samsung,s2mps11-wrstbi-ground;
    +
    + s2mps13_osc: clocks {
    + compatible = "samsung,s2mps13-clk";
    + #clock-cells = <1>;
    + clock-output-names = "s2mps13_ap", "s2mps13_cp",
    + "s2mps13_bt";
    + };
    +
    + regulators {
    + ldo1_reg: LDO1 {
    + regulator-name = "VDD_ALIVE_0.9V_AP";
    + regulator-min-microvolt = <900000>;
    + regulator-max-microvolt = <900000>;
    + regulator-always-on;
    + };
    +
    + ldo2_reg: LDO2 {
    + regulator-name = "VDDQ_MMC2_2.8V_AP";
    + regulator-min-microvolt = <2800000>;
    + regulator-max-microvolt = <2800000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo3_reg: LDO3 {
    + regulator-name = "VDD1_E_1.8V_AP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + };
    +
    + ldo4_reg: LDO4 {
    + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
    + regulator-min-microvolt = <1300000>;
    + regulator-max-microvolt = <1300000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo5_reg: LDO5 {
    + regulator-name = "VDD10_DPLL_1.0V_AP";
    + regulator-min-microvolt = <1000000>;
    + regulator-max-microvolt = <1000000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo6_reg: LDO6 {
    + regulator-name = "VDD10_MIPI2L_1.0V_AP";
    + regulator-min-microvolt = <1000000>;
    + regulator-max-microvolt = <1000000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo7_reg: LDO7 {
    + regulator-name = "VDD18_MIPI2L_1.8V_AP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + };
    +
    + ldo8_reg: LDO8 {
    + regulator-name = "VDD18_LLI_1.8V_AP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo9_reg: LDO9 {
    + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo10_reg: LDO10 {
    + regulator-name = "VDD33_USB30_3.0V_AP";
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3000000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo11_reg: LDO11 {
    + regulator-name = "VDD_INT_M_1.0V_AP";
    + regulator-min-microvolt = <1000000>;
    + regulator-max-microvolt = <1000000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo12_reg: LDO12 {
    + regulator-name = "VDD_KFC_M_1.1V_AP";
    + regulator-min-microvolt = <800000>;
    + regulator-max-microvolt = <1350000>;
    + regulator-always-on;
    + };
    +
    + ldo13_reg: LDO13 {
    + regulator-name = "VDD_G3D_M_0.95V_AP";
    + regulator-min-microvolt = <950000>;
    + regulator-max-microvolt = <950000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo14_reg: LDO14 {
    + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
    + regulator-min-microvolt = <1200000>;
    + regulator-max-microvolt = <1200000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo15_reg: LDO15 {
    + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
    + regulator-min-microvolt = <1200000>;
    + regulator-max-microvolt = <1200000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + ldo16_reg: LDO16 {
    + regulator-name = "VDDQ_EFUSE";
    + regulator-min-microvolt = <1400000>;
    + regulator-max-microvolt = <3400000>;
    + regulator-always-on;
    + };
    +
    + ldo17_reg: LDO17 {
    + regulator-name = "V_TFLASH_2.8V_AP";
    + regulator-min-microvolt = <2800000>;
    + regulator-max-microvolt = <2800000>;
    + };
    +
    + ldo18_reg: LDO18 {
    + regulator-name = "V_CODEC_1.8V_AP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + };
    +
    + ldo19_reg: LDO19 {
    + regulator-name = "VDDA_1.8V_COMP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + };
    +
    + ldo20_reg: LDO20 {
    + regulator-name = "VCC_2.8V_AP";
    + regulator-min-microvolt = <2800000>;
    + regulator-max-microvolt = <2800000>;
    + regulator-always-on;
    + };
    +
    + ldo21_reg: LDO21 {
    + regulator-name = "VT_CAM_1.8V";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + };
    +
    + ldo22_reg: LDO22 {
    + regulator-name = "CAM_IO_1.8V_AP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + };
    +
    + ldo23_reg: LDO23 {
    + regulator-name = "CAM_SEN_CORE_1.2V_AP";
    + regulator-min-microvolt = <1050000>;
    + regulator-max-microvolt = <1200000>;
    + };
    +
    + ldo24_reg: LDO24 {
    + regulator-name = "VT_CAM_1.2V";
    + regulator-min-microvolt = <1200000>;
    + regulator-max-microvolt = <1200000>;
    + };
    +
    + ldo25_reg: LDO25 {
    + regulator-name = "CAM_SEN_A2.8V_AP";
    + regulator-min-microvolt = <2800000>;
    + regulator-max-microvolt = <2800000>;
    + };
    +
    + ldo26_reg: LDO26 {
    + regulator-name = "CAM_AF_2.8V_AP";
    + regulator-min-microvolt = <2800000>;
    + regulator-max-microvolt = <2800000>;
    + };
    +
    + ldo27_reg: LDO27 {
    + regulator-name = "VCC_3.0V_LCD_AP";
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3000000>;
    + regulator-always-on;
    + };
    +
    + ldo28_reg: LDO28 {
    + regulator-name = "VCC_1.8V_LCD_AP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + };
    +
    + ldo29_reg: LDO29 {
    + regulator-name = "VT_CAM_2.8V";
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3000000>;
    + regulator-always-on;
    + };
    +
    + ldo30_reg: LDO30 {
    + regulator-name = "TSP_AVDD_3.3V_AP";
    + regulator-min-microvolt = <3300000>;
    + regulator-max-microvolt = <3300000>;
    + };
    +
    + ldo31_reg: LDO31 {
    + regulator-name = "TSP_VDD_1.85V_AP";
    + regulator-min-microvolt = <1850000>;
    + regulator-max-microvolt = <1850000>;
    + regulator-boot-on;
    + };
    +
    + ldo32_reg: LDO32 {
    + regulator-name = "VTOUCH_1.8V_AP";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-boot-on;
    + };
    +
    + ldo33_reg: LDO33 {
    + regulator-name = "VTOUCH_LED_3.3V";
    + regulator-min-microvolt = <2500000>;
    + regulator-max-microvolt = <3300000>;
    + regulator-ramp-delay = <12500>;
    + };
    +
    + ldo34_reg: LDO34 {
    + regulator-name = "VCC_1.8V_MHL_AP";
    + regulator-min-microvolt = <1000000>;
    + regulator-max-microvolt = <2100000>;
    + };
    +
    + ldo35_reg: LDO35 {
    + regulator-name = "OIS_VM_2.8V";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <2800000>;
    + };
    +
    + ldo36_reg: LDO36 {
    + regulator-name = "VSIL_1.0V";
    + regulator-min-microvolt = <1000000>;
    + regulator-max-microvolt = <1000000>;
    + };
    +
    + ldo37_reg: LDO37 {
    + regulator-name = "VF_1.8V";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + };
    +
    + ldo38_reg: LDO38 {
    + regulator-name = "VCC_3.0V_MOTOR_AP";
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3000000>;
    + };
    +
    + ldo39_reg: LDO39 {
    + regulator-name = "V_HRM_1.8V";
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + };
    +
    + ldo40_reg: LDO40 {
    + regulator-name = "V_HRM_3.3V";
    + regulator-min-microvolt = <3300000>;
    + regulator-max-microvolt = <3300000>;
    + };
    +
    + buck1_reg: BUCK1 {
    + regulator-name = "VDD_MIF_0.9V_AP";
    + regulator-min-microvolt = <600000>;
    + regulator-max-microvolt = <1500000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + buck2_reg: BUCK2 {
    + regulator-name = "VDD_EGL_1.0V_AP";
    + regulator-min-microvolt = <900000>;
    + regulator-max-microvolt = <1300000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + buck3_reg: BUCK3 {
    + regulator-name = "VDD_KFC_1.0V_AP";
    + regulator-min-microvolt = <800000>;
    + regulator-max-microvolt = <1200000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + buck4_reg: BUCK4 {
    + regulator-name = "VDD_INT_0.95V_AP";
    + regulator-min-microvolt = <600000>;
    + regulator-max-microvolt = <1500000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + buck5_reg: BUCK5 {
    + regulator-name = "VDD_DISP_CAM0_0.9V_AP";
    + regulator-min-microvolt = <600000>;
    + regulator-max-microvolt = <1500000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + buck6_reg: BUCK6 {
    + regulator-name = "VDD_G3D_0.9V_AP";
    + regulator-min-microvolt = <600000>;
    + regulator-max-microvolt = <1500000>;
    + regulator-always-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + buck7_reg: BUCK7 {
    + regulator-name = "VDD_MEM1_1.2V_AP";
    + regulator-min-microvolt = <1200000>;
    + regulator-max-microvolt = <1200000>;
    + regulator-always-on;
    + };
    +
    + buck8_reg: BUCK8 {
    + regulator-name = "VDD_LLDO_1.35V_AP";
    + regulator-min-microvolt = <1350000>;
    + regulator-max-microvolt = <3300000>;
    + regulator-always-on;
    + };
    +
    + buck9_reg: BUCK9 {
    + regulator-name = "VDD_MLDO_2.0V_AP";
    + regulator-min-microvolt = <1350000>;
    + regulator-max-microvolt = <3300000>;
    + regulator-always-on;
    + };
    +
    + buck10_reg: BUCK10 {
    + regulator-name = "vdd_mem2";
    + regulator-min-microvolt = <550000>;
    + regulator-max-microvolt = <1500000>;
    + regulator-always-on;
    + };
    + };
    + };
    +};
    +
    +&hsi2c_8 {
    + status = "okay";
    +
    + max77843@66 {
    + compatible = "samsung,max77843";
    + interrupt-parent = <&gpa1>;
    + interrupts = <5 2>;
    + reg = <0x66>;
    + wakeup;
    +
    + muic: max77843-muic {
    + compatible = "maxim,max77843-muic";
    + };
    +
    + regulators {
    + compatible = "maxim,max77843-regulator";
    + safeout1_reg: SAFEOUT1 {
    + regulator-name = "SAFEOUT1";
    + regulator-min-microvolt = <3300000>;
    + regulator-max-microvolt = <4950000>;
    + };
    +
    + safeout2_reg: SAFEOUT2 {
    + regulator-name = "SAFEOUT2";
    + regulator-min-microvolt = <3300000>;
    + regulator-max-microvolt = <4950000>;
    + };
    +
    + charger_reg: CHARGER {
    + regulator-name = "CHARGER";
    + regulator-min-microamp = <100000>;
    + regulator-max-microamp = <3150000>;
    + };
    + };
    +
    + haptic: max77843-haptic {
    + compatible = "maxim,max77843-haptic";
    + haptic-supply = <&ldo38_reg>;
    + pwms = <&pwm 0 33670 0>;
    + pwm-names = "haptic";
    + };
    + };
    +};
    +
    +&hsi2c_11 {
    + status = "okay";
    +};
    +
    +&i2s0 {
    + status = "okay";
    +};
    +
    +&lpass {
    + status = "okay";
    +};
    +
    +&mshc_0 {
    + status = "okay";
    + num-slots = <1>;
    + broken-cd;
    + non-removable;
    + card-detect-delay = <200>;
    + samsung,dw-mshc-ciu-div = <3>;
    + samsung,dw-mshc-sdr-timing = <0 4>;
    + samsung,dw-mshc-ddr-timing = <0 2>;
    + samsung,dw-mshc-hs400-timing = <0 3>;
    + samsung,read-strobe-delay = <90>;
    + fifo-depth = <0x80>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rdqs>;
    + bus-width = <8>;
    + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
    + assigned-clock-rates = <800000000>;
    +};
    +
    +&pinctrl_alive {
    + pinctrl-names = "default";
    + pinctrl-0 = <&initial_alive>;
    +
    + initial_alive: initial-state {
    + PIN(IN, gpa0-0, DOWN, LV1);
    + PIN(IN, gpa0-1, NONE, LV1);
    + PIN(IN, gpa0-2, DOWN, LV1);
    + PIN(IN, gpa0-3, NONE, LV1);
    + PIN(IN, gpa0-4, NONE, LV1);
    + PIN(IN, gpa0-5, DOWN, LV1);
    + PIN(IN, gpa0-6, NONE, LV1);
    + PIN(IN, gpa0-7, NONE, LV1);
    +
    + PIN(IN, gpa1-0, UP, LV1);
    + PIN(IN, gpa1-1, NONE, LV1);
    + PIN(IN, gpa1-2, NONE, LV1);
    + PIN(IN, gpa1-3, DOWN, LV1);
    + PIN(IN, gpa1-4, DOWN, LV1);
    + PIN(IN, gpa1-5, NONE, LV1);
    + PIN(IN, gpa1-6, NONE, LV1);
    + PIN(IN, gpa1-7, NONE, LV1);
    +
    + PIN(IN, gpa2-0, NONE, LV1);
    + PIN(IN, gpa2-1, NONE, LV1);
    + PIN(IN, gpa2-2, NONE, LV1);
    + PIN(IN, gpa2-3, DOWN, LV1);
    + PIN(IN, gpa2-4, NONE, LV1);
    + PIN(IN, gpa2-5, DOWN, LV1);
    + PIN(IN, gpa2-6, DOWN, LV1);
    + PIN(IN, gpa2-7, NONE, LV1);
    +
    + PIN(IN, gpa3-0, DOWN, LV1);
    + PIN(IN, gpa3-1, DOWN, LV1);
    + PIN(IN, gpa3-2, NONE, LV1);
    + PIN(IN, gpa3-3, DOWN, LV1);
    + PIN(IN, gpa3-4, NONE, LV1);
    + PIN(IN, gpa3-5, DOWN, LV1);
    + PIN(IN, gpa3-6, DOWN, LV1);
    + PIN(IN, gpa3-7, DOWN, LV1);
    +
    + PIN(IN, gpf1-0, NONE, LV1);
    + PIN(IN, gpf1-1, NONE, LV1);
    + PIN(IN, gpf1-2, DOWN, LV1);
    + PIN(IN, gpf1-4, UP, LV1);
    + PIN(OUT, gpf1-5, NONE, LV1);
    + PIN(IN, gpf1-6, DOWN, LV1);
    + PIN(IN, gpf1-7, DOWN, LV1);
    +
    + PIN(IN, gpf2-0, DOWN, LV1);
    + PIN(IN, gpf2-1, DOWN, LV1);
    + PIN(IN, gpf2-2, DOWN, LV1);
    + PIN(IN, gpf2-3, DOWN, LV1);
    +
    + PIN(IN, gpf3-0, DOWN, LV1);
    + PIN(IN, gpf3-1, DOWN, LV1);
    + PIN(IN, gpf3-2, NONE, LV1);
    + PIN(IN, gpf3-3, DOWN, LV1);
    +
    + PIN(IN, gpf4-0, DOWN, LV1);
    + PIN(IN, gpf4-1, DOWN, LV1);
    + PIN(IN, gpf4-2, DOWN, LV1);
    + PIN(IN, gpf4-3, DOWN, LV1);
    + PIN(IN, gpf4-4, DOWN, LV1);
    + PIN(IN, gpf4-5, DOWN, LV1);
    + PIN(IN, gpf4-6, DOWN, LV1);
    + PIN(IN, gpf4-7, DOWN, LV1);
    +
    + PIN(IN, gpf5-0, DOWN, LV1);
    + PIN(IN, gpf5-1, DOWN, LV1);
    + PIN(IN, gpf5-2, DOWN, LV1);
    + PIN(IN, gpf5-3, DOWN, LV1);
    + PIN(OUT, gpf5-4, NONE, LV1);
    + PIN(IN, gpf5-5, DOWN, LV1);
    + PIN(IN, gpf5-6, DOWN, LV1);
    + PIN(IN, gpf5-7, DOWN, LV1);
    + };
    +
    + te_irq: te_irq {
    + samsung,pins = "gpf1-3";
    + samsung,pin-function = <0xf>;
    + };
    +};
    +
    +&pinctrl_cpif {
    + pinctrl-names = "default";
    + pinctrl-0 = <&initial_cpif>;
    +
    + initial_cpif: initial-state {
    + PIN(IN, gpv6-0, DOWN, LV1);
    + PIN(IN, gpv6-1, DOWN, LV1);
    + };
    +};
    +
    +&pinctrl_ese {
    + pinctrl-names = "default";
    + pinctrl-0 = <&initial_ese>;
    +
    + initial_ese: initial-state {
    + PIN(IN, gpj2-0, DOWN, LV1);
    + PIN(IN, gpj2-1, DOWN, LV1);
    + PIN(IN, gpj2-2, DOWN, LV1);
    + };
    +};
    +
    +&pinctrl_fsys {
    + pinctrl-names = "default";
    + pinctrl-0 = <&initial_fsys>;
    +
    + initial_fsys: initial-state {
    + PIN(IN, gpr3-0, NONE, LV1);
    + PIN(IN, gpr3-1, DOWN, LV1);
    + PIN(IN, gpr3-2, DOWN, LV1);
    + PIN(IN, gpr3-3, DOWN, LV1);
    + PIN(IN, gpr3-7, NONE, LV1);
    + };
    +};
    +
    +&pinctrl_imem {
    + pinctrl-names = "default";
    + pinctrl-0 = <&initial_imem>;
    +
    + initial_imem: initial-state {
    + PIN(IN, gpf0-0, UP, LV1);
    + PIN(IN, gpf0-1, UP, LV1);
    + PIN(IN, gpf0-2, DOWN, LV1);
    + PIN(IN, gpf0-3, UP, LV1);
    + PIN(IN, gpf0-4, DOWN, LV1);
    + PIN(IN, gpf0-5, NONE, LV1);
    + PIN(IN, gpf0-6, DOWN, LV1);
    + PIN(IN, gpf0-7, UP, LV1);
    + };
    +};
    +
    +&pinctrl_nfc {
    + pinctrl-names = "default";
    + pinctrl-0 = <&initial_nfc>;
    +
    + initial_nfc: initial-state {
    + PIN(IN, gpj0-2, DOWN, LV1);
    + };
    +};
    +
    +&pinctrl_peric {
    + pinctrl-names = "default";
    + pinctrl-0 = <&initial_peric>;
    +
    + initial_peric: initial-state {
    + PIN(IN, gpv7-0, DOWN, LV1);
    + PIN(IN, gpv7-1, DOWN, LV1);
    + PIN(IN, gpv7-2, NONE, LV1);
    + PIN(IN, gpv7-3, DOWN, LV1);
    + PIN(IN, gpv7-4, DOWN, LV1);
    + PIN(IN, gpv7-5, DOWN, LV1);
    +
    + PIN(IN, gpb0-4, DOWN, LV1);
    +
    + PIN(IN, gpc0-2, DOWN, LV1);
    + PIN(IN, gpc0-5, DOWN, LV1);
    + PIN(IN, gpc0-7, DOWN, LV1);
    +
    + PIN(IN, gpc1-1, DOWN, LV1);
    +
    + PIN(IN, gpc3-4, NONE, LV1);
    + PIN(IN, gpc3-5, NONE, LV1);
    + PIN(IN, gpc3-6, NONE, LV1);
    + PIN(IN, gpc3-7, NONE, LV1);
    +
    + PIN(OUT, gpg0-0, NONE, LV1);
    + PIN(FUNC1, gpg0-1, DOWN, LV1);
    +
    + PIN(IN, gpd2-5, DOWN, LV1);
    +
    + PIN(IN, gpd4-0, NONE, LV1);
    + PIN(IN, gpd4-1, DOWN, LV1);
    + PIN(IN, gpd4-2, DOWN, LV1);
    + PIN(IN, gpd4-3, DOWN, LV1);
    + PIN(IN, gpd4-4, DOWN, LV1);
    +
    + PIN(IN, gpd6-3, DOWN, LV1);
    +
    + PIN(IN, gpd8-1, UP, LV1);
    +
    + PIN(IN, gpg1-0, DOWN, LV1);
    + PIN(IN, gpg1-1, DOWN, LV1);
    + PIN(IN, gpg1-2, DOWN, LV1);
    + PIN(IN, gpg1-3, DOWN, LV1);
    + PIN(IN, gpg1-4, DOWN, LV1);
    +
    + PIN(IN, gpg2-0, DOWN, LV1);
    + PIN(IN, gpg2-1, DOWN, LV1);
    +
    + PIN(IN, gpg3-0, DOWN, LV1);
    + PIN(IN, gpg3-1, DOWN, LV1);
    + PIN(IN, gpg3-5, DOWN, LV1);
    + PIN(IN, gpg3-7, DOWN, LV1);
    + };
    +};
    +
    +&pinctrl_touch {
    + pinctrl-names = "default";
    + pinctrl-0 = <&initial_touch>;
    +
    + initial_touch: initial-state {
    + PIN(IN, gpj1-2, DOWN, LV1);
    + };
    +};
    +
    +&pwm {
    + pinctrl-0 = <&pwm0_out>;
    + pinctrl-names = "default";
    + status = "okay";
    +};
    +
    +&mic {
    + status = "okay";
    +
    + i80-if-timings {
    + };
    +};
    +
    +&serial_1 {
    + status = "okay";
    +};
    +
    +&spi_1 {
    + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
    + status = "okay";
    +
    + wm5110: wm5110-codec@0 {
    + compatible = "wlf,wm5110";
    + reg = <0x0>;
    + spi-max-frequency = <20000000>;
    + interrupt-parent = <&gpa0>;
    + interrupts = <4 0 0>;
    + clocks = <&xxti>, <&s2mps13_osc 2>;
    + clock-names = "mclk1", "mclk2";
    +
    + gpio-controller;
    + #gpio-cells = <2>;
    +
    + wlf,micd-detect-debounce = <300>;
    + wlf,micd-bias-start-time = <0x1>;
    + wlf,micd-rate = <0x7>;
    + wlf,micd-dbtime = <0x1>;
    + wlf,micd-force-micbias;
    + wlf,micd-configs = <0x0 1 0>;
    + wlf,hpdet-channel = <1>;
    + wlf,gpsw = <0x1>;
    + wlf,inmode = <2 0 2 0>;
    +
    + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
    + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
    +
    + /* core supplies */
    + AVDD-supply = <&ldo18_reg>;
    + DBVDD1-supply = <&ldo18_reg>;
    + CPVDD-supply = <&ldo18_reg>;
    + DBVDD2-supply = <&ldo18_reg>;
    + DBVDD3-supply = <&ldo18_reg>;
    +
    + controller-data {
    + samsung,spi-feedback-delay = <0>;
    + };
    + };
    +};
    +
    +&timer {
    + clock-frequency = <24000000>;
    +};
    +
    +&tmu_atlas0 {
    + vtmu-supply = <&ldo3_reg>;
    + status = "okay";
    +};
    +
    +&tmu_apollo {
    + vtmu-supply = <&ldo3_reg>;
    + status = "okay";
    +};
    +
    +&tmu_g3d {
    + vtmu-supply = <&ldo3_reg>;
    + status = "okay";
    +};
    +
    +&usbdrd30 {
    + vdd33-supply = <&ldo10_reg>;
    + vdd10-supply = <&ldo6_reg>;
    + status = "okay";
    +};
    +
    +&usbdrd_dwc3_0 {
    + dr_mode = "otg";
    +};
    +
    +&usbdrd30_phy {
    + vbus-supply = <&safeout1_reg>;
    + status = "okay";
    +};
    +
    +&xxti {
    + clock-frequency = <24000000>;
    +};
    --
    1.9.1
    \
     
     \ /
      Last update: 2016-09-17 09:57    [W:4.381 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site