lkml.org 
[lkml]   [2016]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] pipe: make pipe user buffer limit checks more precise
From
Date
Hello Vegard,

On 08/17/2016 12:07 AM, Vegard Nossum wrote:
> On 08/16/2016 01:14 PM, Michael Kerrisk (man-pages) wrote:
>> As currently implemented, when creating a new pipe or increasing
>> a pipe's capacity with fcntl(F_SETPIPE_SZ), the checks against
>> the limits in /proc/sys/fs/pipe-user-pages-{soft,hard} (added by
>> commit 759c01142a5d0) do not include the pages required for the
>> new pipe or increased capacity. In the case of fcntl(F_SETPIPE_SZ),
>> this means that an unprivileged user can make a one-time capacity
>> increase that pushes the user consumption over the limits by up
>> to the value specified in /proc/sys/fs/pipe-max-size (which
>> defaults to 1 MiB, but might be set to a much higher value).
>>
>> This patch remedies the problem by including the capacity required
>> for the new pipe or the pipe capacity increase in the check against
>> the limit.
>>
>> There is a small chance that this change could break user-space,
>> since there are cases where pipe() and fcntl(F_SETPIPE_SZ) calls
>> that previously succeeded might fail. However, the chances are
>> small, since (a) the pipe-user-pages-{soft,hard} limits are new
>> (in 4.5), and the default soft/hard limits are high/unlimited.
>> Therefore, it seems warranted to make these limits operate more
>> precisely (and behave more like what users probably expect).
>>
>> Using the test program shown in the previous patch, on an unpatched
>> kernel, we first set some limits:
>>
>> # echo 0 > /proc/sys/fs/pipe-user-pages-soft
>> # echo 1000000000 > /proc/sys/fs/pipe-max-size
>> # echo 10000 > /proc/sys/fs/pipe-user-pages-hard # 40.96 MB
>>
>> Then show that we can set a pipe with capacity (100MB) that is
>> over the hard limit
>>
>> # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000
>> Loop 1: set pipe capacity to 100000000 bytes
>> F_SETPIPE_SZ returned 134217728
>>
>> Now set the capacity to 100MB twice. The second call fails (which is
>> probably surprising to most users, since it seems like a no-op):
>>
>> # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000 0 100000000
>> Loop 1: set pipe capacity to 100000000 bytes
>> F_SETPIPE_SZ returned 134217728
>> Loop 2: set pipe capacity to 100000000 bytes
>> Loop 2, pipe 0: F_SETPIPE_SZ failed: fcntl: Operation not permitted
>>
>> With a patched kernel, setting a capacity over the limit fails at the
>> first attempt:
>>
>> # echo 0 > /proc/sys/fs/pipe-user-pages-soft
>> # echo 1000000000 > /proc/sys/fs/pipe-max-size
>> # echo 10000 > /proc/sys/fs/pipe-user-pages-hard
>> # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000
>> Loop 1: set pipe capacity to 100000000 bytes
>> Loop 1, pipe 0: F_SETPIPE_SZ failed: fcntl: Operation not permitted
>>
>> Cc: Willy Tarreau <w@1wt.eu>
>> Cc: Vegard Nossum <vegard.nossum@oracle.com>
>> Cc: socketpair@gmail.com
>> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
>> Cc: Jens Axboe <axboe@fb.com>
>> Cc: Al Viro <viro@zeniv.linux.org.uk>
>> Cc: stable@vger.kernel.org
>> Cc: linux-api@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
>> ---
>> fs/pipe.c | 24 ++++++++++++++----------
>> 1 file changed, 14 insertions(+), 10 deletions(-)
>>
>> diff --git a/fs/pipe.c b/fs/pipe.c
>> index a98ebca..397d8d9 100644
>> --- a/fs/pipe.c
>> +++ b/fs/pipe.c
>> @@ -610,16 +610,20 @@ static void account_pipe_buffers(struct pipe_inode_info *pipe,
>> atomic_long_add(new - old, &pipe->user->pipe_bufs);
>> }
>>
>> -static bool too_many_pipe_buffers_soft(struct user_struct *user)
>> +static bool too_many_pipe_buffers_soft(struct user_struct *user,
>> + unsigned int nr_pages)
>> {
>> return pipe_user_pages_soft &&
>> - atomic_long_read(&user->pipe_bufs) >= pipe_user_pages_soft;
>> + atomic_long_read(&user->pipe_bufs) + nr_pages >=
>> + pipe_user_pages_soft;
>> }
>>
>> -static bool too_many_pipe_buffers_hard(struct user_struct *user)
>> +static bool too_many_pipe_buffers_hard(struct user_struct *user,
>> + unsigned int nr_pages)
>> {
>> return pipe_user_pages_hard &&
>> - atomic_long_read(&user->pipe_bufs) >= pipe_user_pages_hard;
>> + atomic_long_read(&user->pipe_bufs) + nr_pages >=
>> + pipe_user_pages_hard;
>> }
>>
>> struct pipe_inode_info *alloc_pipe_info(void)
>> @@ -631,13 +635,13 @@ struct pipe_inode_info *alloc_pipe_info(void)
>> unsigned long pipe_bufs = PIPE_DEF_BUFFERS;
>> struct user_struct *user = get_current_user();
>>
>> - if (!too_many_pipe_buffers_hard(user)) {
>> - if (too_many_pipe_buffers_soft(user))
>> - pipe_bufs = 1;
>> + if (too_many_pipe_buffers_soft(user, PIPE_DEF_BUFFERS))
>
> Why not pass pipe_bufs here instead of PIPE_DEF_BUFFERS?

Ahh yes. Using PIPE_DEF_BUFFERS here is equivalent, but pipe_bufs
would be better. I'll fix for the next iteration.

>> + pipe_bufs = 1;
>> +
>> + if (!too_many_pipe_buffers_hard(user, pipe_bufs))
>> pipe->bufs = kcalloc(pipe_bufs,
>> sizeof(struct pipe_buffer),
>> GFP_KERNEL_ACCOUNT);
>> - }
>>
>> if (pipe->bufs) {
>> init_waitqueue_head(&pipe->wait);
>
> Not your fault, but this function is a bit weird in that if the
> too_many_pipe_buffers() calls fail, we'll return ENFILE to userspace?
> Same if kcalloc() fails.

Yes, the error is a bit odd. I noticed this as I worked on these
patches, and at least documented the error for pipe(2). I'm not
sure whether we should care enough to change this now.

>> @@ -1132,8 +1136,8 @@ long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
>> if (!capable(CAP_SYS_RESOURCE) && size > pipe_max_size) {
>> ret = -EPERM;
>> goto out;
>> - } else if ((too_many_pipe_buffers_hard(pipe->user) ||
>> - too_many_pipe_buffers_soft(pipe->user)) &&
>> + } else if ((too_many_pipe_buffers_hard(pipe->user, nr_pages) ||
>> + too_many_pipe_buffers_soft(pipe->user, nr_pages)) &&
>> !capable(CAP_SYS_RESOURCE) &&
>> !capable(CAP_SYS_ADMIN)) {
>> ret = -EPERM;
>>
>
> Isn't there also a race where two or more concurrent pipe()/fnctl()
> calls can together push us over the limits before the accounting is done?

I guess there is!

> I think there really ought to be a check after doing the accounting if
> we really want to be meticulous here.

Let me confirm what I understand from your comment: because of the race,
then a user could subvert the checks and allocate an arbitrary amount
of kernel memory for pipes. Right?

I'm not sure what you mean by "a check after doing the accounting". Is not the
only solution here some kind of lock around the check+accounting steps?

> Thanks for fixing these and good catch!

You're welcome ;-).

Cheers,

Michael

--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.193 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site