lkml.org 
[lkml]   [2016]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] [media] vb2: move dma-buf unmap from __vb2_dqbuf() to vb2_buffer_done()
From
Date
Hello Hans,

Thanks a lot for your feedback.

On 08/13/2016 09:47 AM, Hans Verkuil wrote:
> On 07/20/2016 08:22 PM, Javier Martinez Canillas wrote:
>> Currently the dma-buf is unmapped when the buffer is dequeued by userspace
>> but it's not used anymore after the driver finished processing the buffer.
>>
>> So instead of doing the dma-buf unmapping in __vb2_dqbuf(), it can be made
>> in vb2_buffer_done() after the driver notified that buf processing is done.
>>
>> Decoupling the buffer dequeue from the dma-buf unmapping has also the side
>> effect of making possible to add dma-buf fence support in the future since
>> the buffer could be dequeued even before the driver has finished using it.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>>
>> ---
>> Hello,
>>
>> I've tested this patch doing DMA buffer sharing between a
>> vivid input and output device with both v4l2-ctl and gst:
>>
>> $ v4l2-ctl -d0 -e1 --stream-dmabuf --stream-out-mmap
>> $ v4l2-ctl -d0 -e1 --stream-mmap --stream-out-dmabuf
>> $ gst-launch-1.0 v4l2src device=/dev/video0 io-mode=dmabuf ! v4l2sink device=/dev/video1 io-mode=dmabuf-import
>>
>> And I didn't find any issues but more testing will be appreciated.
>>
>> Best regards,
>> Javier
>>
>> drivers/media/v4l2-core/videobuf2-core.c | 34 +++++++++++++++++++++-----------
>> 1 file changed, 22 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
>> index 7128b09810be..973331efaf79 100644
>> --- a/drivers/media/v4l2-core/videobuf2-core.c
>> +++ b/drivers/media/v4l2-core/videobuf2-core.c
>> @@ -958,6 +958,22 @@ void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no)
>> EXPORT_SYMBOL_GPL(vb2_plane_cookie);
>>
>> /**
>> + * __vb2_unmap_dmabuf() - unmap dma-buf attached to buffer planes
>> + */
>> +static void __vb2_unmap_dmabuf(struct vb2_buffer *vb)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < vb->num_planes; ++i) {
>> + if (!vb->planes[i].dbuf_mapped)
>> + continue;
>> + call_void_memop(vb, unmap_dmabuf,
>> + vb->planes[i].mem_priv);
>
> Does unmap_dmabuf work in interrupt context? Since vb2_buffer_done can be called from
> an irq handler this is a concern.
>

Good point, I believe it shouldn't be called from atomic context since both
the dma_buf_vunmap() and dma_buf_unmap_attachment() functions can sleep.

> That said, vb2_buffer_done already calls call_void_memop(vb, finish, vb->planes[plane].mem_priv);
> to sync buffers, and that can take a long time as well. So it is not a good idea to
> have this in vb2_buffer_done.
>

I see.

> What I would like to see is to have vb2 handle this finish() call and the vb2_unmap_dmabuf
> in some workthread or equivalent.
>
> It would complicate matters somewhat in vb2, but it would simplify drivers since these
> actions would not longer take place in interrupt context.
>
> I think this patch makes sense, but I would prefer that this is moved out of the interrupt
> context.
>

Ok, I can take a look to this and handle the finish() and unmap_dmabuf()
out of interrupt context as you suggested.

> Regards,
>
> Hans
>

Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.051 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site