lkml.org 
[lkml]   [2016]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/9] Add MT8173 Video Decoder Driver
From
Date
Hi Tiffany,

This needs a v4: the DocBook format has been replaced by sphinx, and I also see that
the vb2 queue_setup function is out-of-date (the allocation contexts no longer exist).

There were also a lot of comments about the MT21 format. I recommend splitting off the
code adding MT21 into separate patches at the end of the patch series. That way if there
are more comments it is easy to merge everything but those patches relating to MT21.

Can you also add the patches for the new V4L2_PIX_FMT_VP9 to this patch series? Those
needs to be updated as well due to the move to sphinx.

Thanks!

Hans

On 05/30/2016 02:29 PM, Tiffany Lin wrote:
> ==============
> Introduction
> ==============
>
> The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs.
> Mediatek Video Codec is able to handle video decoding of in a range of formats.
>
> This patch series add Mediatek block format V4L2_PIX_FMT_MT21, the decoder driver will decoded bitstream to
> V4L2_PIX_FMT_MT21 format.
>
> This patch series rely on MTK VPU driver in patch series "Add MT8173 Video Encoder Driver and VPU Driver"[1]
> and patch "CHROMIUM: v4l: Add V4L2_PIX_FMT_VP9 definition"[2] for VP9 support.
> Mediatek Video Decoder driver rely on VPU driver to load, communicate with VPU.
>
> Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI both have been merged in v4.6-rc1.
>
> [1]https://patchwork.linuxtv.org/patch/33734/
> [2]https://chromium-review.googlesource.com/#/c/245241/
>
> ==================
> Device interface
> ==================
>
> In principle the driver bases on v4l2 memory-to-memory framework:
> it provides a single video node and each opened file handle gets its own private context with separate
> buffer queues. Each context consist of 2 buffer queues: OUTPUT (for source buffers, i.e. bitstream)
> and CAPTURE (for destination buffers, i.e. decoded video frames).
> OUTPUT and CAPTURE buffer could be MMAP or DMABUF memory type.
> VIDIOC_G_CTRL and VIDIOC_G_EXT_CTRLS return V4L2_CID_MIN_BUFFERS_FOR_CAPTURE only when dirver in MTK_STATE_HEADER
> state, or it will return EAGAIN.
> Driver do not support subscribe event for control 'User Controls' for now.
> And it default support export DMABUF for other display drivers.
>
> Change in v3:
> 1. Refine vdec hw clock setting
> 2. Refine vp9 codec driver
> 3. Refine v4l2 codec driver
>
> Change in v2:
> 1. Add documentation for V4L2_PIX_FMT_MT21
> 2. Remove DRM_FORMAT_MT21
> 2. Refine code according to review comments
>
> v4l2-compliance test output:
> localhost Encode # ./v4l2-compliance -d /dev/video0
> Driver Info:
> Driver name : mtk-vcodec-dec
> Card type : platform:mt8173
> Bus info : platform:mt8173
> Driver version: 4.4.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video0 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERYCTRL/MENU: OK
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-controls.cpp(357): g_ctrl returned an error (11)
> test VIDIOC_G/S_CTRL: FAIL
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-controls.cpp(579): g_ext_ctrls returned an error (11)
> test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-controls.cpp(721): subscribe event for control 'User Controls' failed
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 2 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-formats.cpp(405): expected EINVAL, but got 11 when getting format for buftype 9
> test VIDIOC_G_FMT: FAIL
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(500): q.has_expbuf(node)
> test VIDIOC_EXPBUF: FAIL
>
>
> Total: 38, Succeeded: 33, Failed: 5, Warnings: 0
>
>
> Andrew-CT Chen (1):
> VPU: mediatek: Add decode support
>
> Tiffany Lin (8):
> v4l: add Mediatek compressed video block format
> DocBook/v4l: Add compressed video formats used on MT8173 codec driver
> dt-bindings: Add a binding for Mediatek Video Decoder
> vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver
> vcodec: mediatek: Add Mediatek H264 Video Decoder Driver
> vcodec: mediatek: Add Mediatek VP8 Video Decoder Driver
> vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver
> arm64: dts: mediatek: Add Video Decoder for MT8173
>
> Documentation/DocBook/media/v4l/pixfmt.xml | 6 +
> .../devicetree/bindings/media/mediatek-vcodec.txt | 57 +-
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 44 +
> drivers/media/platform/mtk-vcodec/Makefile | 15 +-
> drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 1348 ++++++++++++++++++++
> drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h | 88 ++
> .../media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 408 ++++++
> .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 206 +++
> .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 28 +
> drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 88 +-
> .../media/platform/mtk-vcodec/mtk_vcodec_intr.c | 4 +-
> .../media/platform/mtk-vcodec/mtk_vcodec_intr.h | 2 +-
> .../media/platform/mtk-vcodec/mtk_vcodec_util.c | 31 +-
> .../media/platform/mtk-vcodec/mtk_vcodec_util.h | 7 +-
> .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 503 ++++++++
> .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 630 +++++++++
> .../media/platform/mtk-vcodec/vdec/vdec_vp9_if.c | 967 ++++++++++++++
> drivers/media/platform/mtk-vcodec/vdec_drv_base.h | 56 +
> drivers/media/platform/mtk-vcodec/vdec_drv_if.c | 117 ++
> drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 101 ++
> drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h | 103 ++
> drivers/media/platform/mtk-vcodec/vdec_vpu_if.c | 168 +++
> drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 96 ++
> drivers/media/platform/mtk-vpu/mtk_vpu.c | 12 +
> drivers/media/platform/mtk-vpu/mtk_vpu.h | 27 +
> include/uapi/linux/videodev2.h | 1 +
> 26 files changed, 5090 insertions(+), 23 deletions(-)
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec_drv_base.h
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec_drv_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec_drv_if.h
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
>

\
 
 \ /
  Last update: 2016-09-17 09:56    [W:0.284 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site