Messages in this thread | | | Date | Mon, 15 Aug 2016 15:17:03 +0000 | From | Jason Cooper <> | Subject | Re: [PATCH 8/9] MIPS: xilfpga: Add DT node for AXI emaclite |
| |
Hi Zubair,
On Mon, Aug 15, 2016 at 02:55:34PM +0100, Zubair Lutfullah Kakakhel wrote: > The xilfpga platform has a Xilinx AXI emaclite block. > > Add the DT node to use it. > > Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> > --- > arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts > index 3658e21..58bc62f 100644 > --- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts > +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts > @@ -42,6 +42,33 @@ > xlnx,tri-default = <0xffffffff>; > } ; > > + axi_ethernetlite: ethernet@10e00000 { > + compatible = "xlnx,xps-ethernetlite-3.00.a";
This one also isn't documented.
> + device_type = "network"; > + interrupt-parent = <&axi_intc>; > + interrupts = <1>; > + local-mac-address = [08 86 4C 0D F7 09];
I'm pretty sure you don't want this in the mainline dts file.
thx,
Jason.
> + phy-handle = <&phy0>; > + reg = <0x10e00000 0x10000>; > + xlnx,duplex = <0x1>; > + xlnx,include-global-buffers = <0x1>; > + xlnx,include-internal-loopback = <0x0>; > + xlnx,include-mdio = <0x1>; > + xlnx,instance = "axi_ethernetlite_inst"; > + xlnx,rx-ping-pong = <0x1>; > + xlnx,s-axi-id-width = <0x1>; > + xlnx,tx-ping-pong = <0x1>; > + xlnx,use-internal = <0x0>; > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + phy0: phy@1 { > + device_type = "ethernet-phy"; > + reg = <1>; > + }; > + }; > + }; > + > axi_uart16550: serial@10400000 { > compatible = "ns16550a"; > reg = <0x10400000 0x10000>; > -- > 1.9.1 >
| |