lkml.org 
[lkml]   [2016]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 4/4] serial: pl011: add console matching function
On Mon, Aug 15, 2016 at 04:35:03PM +0300, Aleksey Makarov wrote:
> This patch adds function pl011_console_match() that implements
> method match of struct console. It allows to match consoles against
> data specified in a string, for example taken from command line or
> compiled by ACPI SPCR table handler.
>
> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
> Reviewed-by: Peter Hurley <peter@hurleysoftware.com>

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>

Thanks.

> ---
> drivers/tty/serial/amba-pl011.c | 55 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index 8a9e213..2f9af8a 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -2288,12 +2288,67 @@ static int __init pl011_console_setup(struct console *co, char *options)
> return uart_set_options(&uap->port, co, baud, parity, bits, flow);
> }
>
> +/**
> + * pl011_console_match - non-standard console matching
> + * @co: registering console
> + * @name: name from console command line
> + * @idx: index from console command line
> + * @options: ptr to option string from console command line
> + *
> + * Only attempts to match console command lines of the form:
> + * console=pl011,mmio|mmio32,<addr>[,<options>]
> + * console=pl011,0x<addr>[,<options>]
> + * This form is used to register an initial earlycon boot console and
> + * replace it with the amba_console at pl011 driver init.
> + *
> + * Performs console setup for a match (as required by interface)
> + * If no <options> are specified, then assume the h/w is already setup.
> + *
> + * Returns 0 if console matches; otherwise non-zero to use default matching
> + */
> +static int __init pl011_console_match(struct console *co, char *name, int idx,
> + char *options)
> +{
> + unsigned char iotype;
> + unsigned long addr;
> + int i;
> +
> + if (strcmp(name, "pl011") != 0)
> + return -ENODEV;
> +
> + if (uart_parse_earlycon(options, &iotype, &addr, &options))
> + return -ENODEV;
> +
> + if (iotype != UPIO_MEM && iotype != UPIO_MEM32)
> + return -ENODEV;
> +
> + /* try to match the port specified on the command line */
> + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
> + struct uart_port *port;
> +
> + if (!amba_ports[i])
> + continue;
> +
> + port = &amba_ports[i]->port;
> +
> + if (port->mapbase != addr)
> + continue;
> +
> + co->index = i;
> + port->cons = co;
> + return pl011_console_setup(co, options);
> + }
> +
> + return -ENODEV;
> +}
> +
> static struct uart_driver amba_reg;
> static struct console amba_console = {
> .name = "ttyAMA",
> .write = pl011_console_write,
> .device = uart_console_device,
> .setup = pl011_console_setup,
> + .match = pl011_console_match,
> .flags = CON_PRINTBUFFER,
> .index = -1,
> .data = &amba_reg,
> --
> 2.9.2
>

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

\
 
 \ /
  Last update: 2016-09-17 09:56    [W:0.040 / U:1.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site