lkml.org 
[lkml]   [2016]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.2 59/94] can: at91_can: RX queue could get stuck at high bus load
3.2.82-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfgang Grandegger <wg@grandegger.com>

commit 43200a4480cbbe660309621817f54cbb93907108 upstream.

At high bus load it could happen that "at91_poll()" enters with all RX
message boxes filled up. If then at the end the "quota" is exceeded as
well, "rx_next" will not be reset to the first RX mailbox and hence the
interrupts remain disabled.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Tested-by: Amr Bekhit <amrbekhit@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/can/at91_can.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -727,9 +727,10 @@ static int at91_poll_rx(struct net_devic

/* upper group completed, look again in lower */
if (priv->rx_next > get_mb_rx_low_last(priv) &&
- quota > 0 && mb > get_mb_rx_last(priv)) {
+ mb > get_mb_rx_last(priv)) {
priv->rx_next = get_mb_rx_first(priv);
- goto again;
+ if (quota > 0)
+ goto again;
}

return received;
\
 
 \ /
  Last update: 2016-09-17 09:56    [W:1.223 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site