lkml.org 
[lkml]   [2016]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.16 208/305] ubi: Make recover_peb power cut aware
3.16.37-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 972228d87445dc46c0a01f5f3de673ac017626f7 upstream.

recover_peb() was never power cut aware,
if a power cut happened right after writing the VID header
upon next attach UBI would blindly use the new partial written
PEB and all data from the old PEB is lost.

In order to make recover_peb() power cut aware, write the new
VID with a proper crc and copy_flag set such that the UBI attach
process will detect whether the new PEB is completely written
or not.
We cannot directly use ubi_eba_atomic_leb_change() since we'd
have to unlock the LEB which is facing a write error.

Reported-by: Jörg Pfähler <pfaehler@isse.de>
Reviewed-by: Jörg Pfähler <pfaehler@isse.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
[bwh: Backported to 3.16: no need to unlock ubi->fm_eba_sem on error]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -521,6 +521,7 @@ static int recover_peb(struct ubi_device
int err, idx = vol_id2idx(ubi, vol_id), new_pnum, data_size, tries = 0;
struct ubi_volume *vol = ubi->volumes[idx];
struct ubi_vid_hdr *vid_hdr;
+ uint32_t crc;

vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
if (!vid_hdr)
@@ -542,12 +543,8 @@ retry:
goto out_put;
}

- vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
- err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
- if (err)
- goto write_error;
+ ubi_assert(vid_hdr->vol_type == UBI_VID_DYNAMIC);

- data_size = offset + len;
mutex_lock(&ubi->buf_mutex);
memset(ubi->peb_buf + offset, 0xFF, len);

@@ -560,6 +557,18 @@ retry:

memcpy(ubi->peb_buf + offset, buf, len);

+ data_size = offset + len;
+ crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size);
+ vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+ vid_hdr->copy_flag = 1;
+ vid_hdr->data_size = cpu_to_be32(data_size);
+ vid_hdr->data_crc = cpu_to_be32(crc);
+ err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
+ if (err) {
+ mutex_unlock(&ubi->buf_mutex);
+ goto write_error;
+ }
+
err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
if (err) {
mutex_unlock(&ubi->buf_mutex);
\
 
 \ /
  Last update: 2016-09-17 09:56    [W:0.675 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site