lkml.org 
[lkml]   [2016]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 0/2] mmc: dw_mmc: host controller reset support
From
Date
Hi Guodong,

On 08/12/2016 05:51 PM, Guodong Xu wrote:
> mmc host controller registers may in abnormal state if mmc is used in
> bootloader, eg. to load kernel from eMMC. Some controllers cann't
> clear their registers when clk is set. They use dedicated reset
> logics to do this.
>
> In this patch, a 'resets' property is added into dw_mmc dts
> node. When driver does parse_dt and probe, it calls reset API to
> triiger 'reset' of dwmmc host controller. When probe error or
> remove, it calls reset API to assert it.
>
> Chip vendor's actual reset logics is implemented in reset driver, not
> in dw_mmc code.
>
> Please also refer to Documentation/devicetree/bindings/reset/reset.txt
>
> Changelog:
> v5:
> * rebase onto https://github.com/jh80chung/dw-mmc
> v4:
> * add reset_control_assert() and usleep() before calling _deassert().
>
> Guodong Xu (2):
> Documentation: synopsys-dw-mshc: add binding for resets
> mmc: dw_mmc: add reset support to dwmmc host controller

Applied on my dw-mmc tree. Thanks!

Best Regards,
Jaehoon Chung

>
> .../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 4 ++++
> drivers/mmc/host/dw_mmc.c | 23 +++++++++++++++++++++-
> include/linux/mmc/dw_mmc.h | 2 ++
> 3 files changed, 28 insertions(+), 1 deletion(-)
>

\
 
 \ /
  Last update: 2016-09-17 09:56    [W:0.032 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site