lkml.org 
[lkml]   [2016]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v9 0/4] ACPI: parse the SPCR table
Date
'ARM Server Base Boot Requirements' [1] mentions SPCR (Serial Port Console
Redirection Table) [2] as a mandatory ACPI table that specifies the
configuration of serial console.

Move "earlycon" early_param handling to earlycon.c to parse this option once

Parse SPCR table, setup earlycon and register specified console.

Enable parsing this table on ARM64. Earlycon should be set up as early as
possible. ACPI boot tables are mapped in
arch/arm64/kernel/acpi.c:acpi_boot_table_init() called from setup_arch() and
that's where we parse spcr. So it has to be opted-in per-arch. When
ACPI_SPCR_TABLE is defined initialization of DT earlycon is deferred until the
DT/ACPI decision is done.

Implement console_match() for pl011.

Based on the work by Leif Lindholm [3]
Thanks to Peter Hurley for explaining how this should work.

Should be applied to v4.8-rc1
Tested on QEMU and ThunderX.
SPCR support is included in QEMU's ARM64 mach-virt since 2.4 release.

v9:
- rebase to v4.8-rc1
- fix compilation for !CONFIG_SERIAL_EARLYCON case
- add Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> for ACPI part
- move constant check out of loop (Yury Norov)
- add '\n' to info message

v8:
- rebase to next-20160520
- remove the patch "ACPICA: Headers: Add new constants for the DBG2 ACPI table"
as it have got to linux-next
- add Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> (but see below)
- fix the patch "serial: pl011: add console matching function". The patch by
Christopher Covington [4] specifies that SBSA uart does 32-bit access to
registers and this breaks the match function. In this series the function
was changed to match when SPCR specifies both mmio32 and mmio access.
I removed Acked-by: Greg from this patch because of these changes.

v7:
https://lkml.kernel.org/g/1459431629-27934-1-git-send-email-aleksey.makarov@linaro.org
- add Acked-by: Rob Herring for "of/serial: move earlycon early_param handling
to serial"
- call DT earlycon initialization from the arch ACPI code, not from parse_spcr()
(Rafael J. Wysocki)
- fix a few minor issues (Rafael J. Wysocki)

v6:
https://lkml.kernel.org/g/1458823925-19560-1-git-send-email-aleksey.makarov@linaro.org
- add documentation for parse_spcr() functioin (Yury Norov)
- don't initialize err variable (Yury Norov)
- add __initdata for the earlycon_init_is_deferred flag variable
- rename the function exported in "of/serial: move earlycon early_param handling
to serial" to avoid clash with the function from arch/microblaze/kernel/prom.c
- defer initialization of DT earlycon until DT/ACPI decision is made
(Rob Herring, Peter Hurley)
- use snprintf instead of sprintf (Andy Shevchenko)
- drop patch that adds EARLYCON_DECLARE for pl011 as EARLYCON_DECLARE is
equivalent to OF_EARLYCON_DECLARE for 4.6+ (Peter Hurley). This means that
SPCR earlycon will not work on the kernels before 4.6

v5:
https://lkml.kernel.org/g/1458643595-14719-1-git-send-email-aleksey.makarov@linaro.org
- drop patch "serial: pl011: use ACPI SPCR to setup 32-bit access" because
it is ugly. Also because Christopher Covington came with a better solution [4]
- remove error message when the table is not provided by ACPI (Andy Shevchenko)
- rewrite spcr.c following the suggestions by Peter Hurley
- add console_match() for pl011 in a separate patch
- add EARLYCON_DECLARE for pl011 in a separate patch
- add patch "of/serial: move earlycon early_param handling to serial" from
the GDB2 series

v4:
https://lkml.kernel.org/g/1456747355-15692-1-git-send-email-aleksey.makarov@linaro.org
- drop patch "ACPI: change __init to __ref for early_acpi_os_unmap_memory()"
ACPI developers work on a new API and asked not to do that.
Instead, use acpi_get_table_with_size()/early_acpi_os_unmap_memory() once
and cache the result. (Lv Zheng)
- fix some style issues (Yury Norov)

v3:
https://lkml.kernel.org/g/1455559532-8305-1-git-send-email-aleksey.makarov@linaro.org

Greg Kroah-Hartman did not like v2 so I have rewritten this patchset:

- drop acpi_match() member of struct console
- drop implementations of this member for pl011 and 8250
- drop the patch that renames some vars in printk.c as it is not needed anymore
- drop patch that introduces system wide acpi_table_parse2().
Instead introduce a custom acpi_table_parse_spcr() in spcr.c

Instead of introducing a new match_acpi() member of struct console,
this patchset introduces a new function acpi_console_check().
This function is called when a new uart is registered at serial_core.c
the same way OF code checks for console. If the registered uart is the
console specified by SPCR table, this function calls add_preferred_console()

The restrictions of this approach are:

- only serial consoles can be set up
- only consoles specified by the memory/io address can be set up
(SPCR can specify devices by PCI id/PCI address)

v2:
https://lkml.kernel.org/g/1455299022-11641-1-git-send-email-aleksey.makarov@linaro.org
- don't use SPCR if user specified console in command line
- fix initialization order of newcon->index = 0
- rename some variables at printk.c (Joe Perches, Peter Hurley)
- enable ACPI_SPCR_TABLE in a separate patch (Andy Shevchenko)
- remove the retry loop for console registering (Peter Hurley).
Instead, obtain SPCR with acpi_get_table(). That works after
call to acpi_early_init() i. e. in any *_initcall()
- describe design decision behind introducing acpi_match() (Peter Hurley)
- fix compilation for x86 + ACPI (Graeme Gregory)
- introduce DBG2 constants in a separate patch (Andy Shevchenko)
- fix a typo in DBG2 constants (Andy Shevchenko)
- add ACPI_DBG2_ARM_SBSA_32BIT constant (Christopher Covington)
- add support for ACPI_DBG2_ARM_SBSA_* consoles (Christopher Covington)
- add documentation for functions
- add a patch that uses SPCR to find if SBSA serial driver should use 32-bit
accessor functions (Christopher Covington)
- change __init to __ref for early_acpi_os_unmap_memory() in a separate patch
- introduce acpi_table_parse2() in a separate patch
- fix fetching the SPCR table early (Mark Salter)
- add a patch from Mark Salter that introduces support for matching 8250-based
consoles

v1:
https://lkml.kernel.org/g/1453722324-22407-1-git-send-email-aleksey.makarov@linaro.org

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html
[2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspx
[3] https://lkml.kernel.org/g/1441716217-23786-1-git-send-email-leif.lindholm@linaro.org
[4] https://lkml.kernel.org/g/1457415800-8799-1-git-send-email-cov@codeaurora.org

Aleksey Makarov (3):
ACPI: parse SPCR and enable matching console
ARM64: ACPI: enable ACPI_SPCR_TABLE
serial: pl011: add console matching function

Leif Lindholm (1):
of/serial: move earlycon early_param handling to serial

arch/arm64/Kconfig | 1 +
arch/arm64/kernel/acpi.c | 11 +++-
drivers/acpi/Kconfig | 3 ++
drivers/acpi/Makefile | 1 +
drivers/acpi/spcr.c | 111 ++++++++++++++++++++++++++++++++++++++++
drivers/of/fdt.c | 11 +---
drivers/tty/serial/amba-pl011.c | 56 ++++++++++++++++++++
drivers/tty/serial/earlycon.c | 19 ++++++-
include/linux/acpi.h | 6 +++
include/linux/of_fdt.h | 2 +
include/linux/serial_core.h | 9 +++-
11 files changed, 216 insertions(+), 14 deletions(-)
create mode 100644 drivers/acpi/spcr.c

--
2.9.2

\
 
 \ /
  Last update: 2016-08-11 18:01    [W:0.121 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site