lkml.org 
[lkml]   [2016]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Regression] "irqdomain: Don't set type when mapping an IRQ" breaks nexus7 gpio buttons
From
Date

On 11/08/16 13:46, Marc Zyngier wrote:
> On 11/08/16 10:47, Jon Hunter wrote:
>>
>> On 11/08/16 09:37, Marc Zyngier wrote:
>>> On 08/08/16 22:48, Linus Walleij wrote:
>>>> On Sat, Aug 6, 2016 at 1:45 AM, John Stultz <john.stultz@linaro.org> wrote:
>>>>
>>>>> @@ -614,7 +615,11 @@ unsigned int irq_create_fwspec_mapping(struct
>>>>> irq_fwspec *fwspec)
>>>>> * it now and return the interrupt number.
>>>>> */
>>>>> if (irq_get_trigger_type(virq) == IRQ_TYPE_NONE) {
>>>>> - irq_set_irq_type(virq, type);
>>>>> + irq_data = irq_get_irq_data(virq);
>>>>> + if (!irq_data)
>>>>> + return 0;
>>>>> +
>>>>> + irqd_set_trigger_type(irq_data, type);
>>>>> return virq;
>>>>> }
>>>>>
>>>>> If I revert just that, it works again.
>>>>
>>>> This makes my platform work too.
>>>> Tested-by: Linus Walleij <linus.walleij@linaro.org>
>>>
>>> Hmmm. I'm now booting your kernel on the APQ8060, and reverting this
>>> hunk doesn't fix it for me. I'm confused...
>>>
>>> The interesting part is this:
>>> 109: 100000 0 msmgpio 88 Level (null)
>>
>> 88 is the pm8058 parent interrupt and so I am surprised you would even
>> see this in /proc/interrupts as it should be a chained interrupt, right?
>>
>> Are you seeing this with all the ethernet updates for the APQ8060 in
>> Linus' branch? I am curious what you see with stock v4.8-rc1 and if
>> interrupts work ok with the change I had proposed. Hard to tell if there
>> is more than one issue here.
>
> Nailed the sucker:

Great!

> diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
> index b4c1bc7..9d7284a 100644
> --- a/kernel/irq/chip.c
> +++ b/kernel/irq/chip.c
> @@ -820,6 +820,18 @@ __irq_do_set_handler(struct irq_desc *desc, irq_flow_handler_t handle,
> desc->name = name;
>
> if (handle != handle_bad_irq && is_chained) {
> + int ret;
> +
> + ret = __irq_set_trigger(desc,
> + irqd_get_trigger_type(&desc->irq_data));
> + WARN_ON(ret);

You could wrap the entire call in the WARN_ON(). I was not sure if there
was a better way to handle that.

> + /*
> + * This is beyond ugly: .set_type may have overridden
> + * the flow, not not knowing that we're dealing with a
> + * chained handler. Reset it here because we know
> + * better.
> + */
> + desc->handle_irq = handle;

Yes I see the call to irq_set_handler in the pinctrl-msm.c set_type.
Good catch!

Apart from the above ...

Acked-by: Jon Hunter <jonathanh@nvidia.com>

Cheers
Jon

--
nvpublic

\
 
 \ /
  Last update: 2016-08-11 16:01    [W:0.114 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site