lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/2] Documentation: synopsys-dw-mshc: add binding for resets
From
Date
在 2016/8/10 16:03, Guodong Xu 写道:
> Add resets property to synopsys-dw-mshc bindings. It is intended to
> represent the hardware reset signal present internally in some host
> controller IC designs.
>
> See Documentation/devicetree/bindings/reset/reset.txt for details.
>
> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> index 8636f5a..4e00e85 100644
> --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> @@ -39,6 +39,10 @@ Required Properties:
>
> Optional properties:
>
> +* resets: phandle + reset specifier pair, intended to represent hardware
> + reset signal present internally in some host controller IC designs.
> + See Documentation/devicetree/bindings/reset/reset.txt for details.
> +
> * clocks: from common clock binding: handle to biu and ciu clocks for the
> bus interface unit clock and the card interface unit clock.
>
>

Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

--
Best Regards
Shawn Lin

\
 
 \ /
  Last update: 2016-08-11 05:01    [W:0.058 / U:4.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site