lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] net: macb: Add 64 bit addressing support for GEM
From
From: Harini Katakam <harini.katakam@xilinx.com>
Date: Tue, 9 Aug 2016 13:15:53 +0530

> This patch adds support for 64 bit addressing and BDs.
> -> Enable 64 bit addressing in DMACFG register.
> -> Set DMA mask when design config register shows support for 64 bit addr.
> -> Add new BD words for higher address when 64 bit DMA support is present.
> -> Add and update TBQPH and RBQPH for MSB of BD pointers.
> -> Change extraction and updation of buffer addresses to use
> 64 bit address.
> -> In gem_rx extract address in one place insted of two and use a
> separate flag for RXUSED.
>
> Signed-off-by: Harini Katakam <harinik@xilinx.com>

It's not the cleanest looking thing in the world with all of these
ifdefs, but I can't suggest anything better, so applied to net-next
thanks.

\
 
 \ /
  Last update: 2016-08-11 03:21    [W:0.133 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site