lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/9] 8250/fintek: rename IRQ_MODE macro
Date
A bugfix for the fintek driver required defining some macros, but
one of them clashes with a system header on ARM:

drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined [-Werror]
#define IRQ_MODE 0x70

In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0,
from /git/arm-soc/arch/arm/include/asm/irqflags.h:6,
from /git/arm-soc/include/linux/irqflags.h:15,
from /git/arm-soc/arch/arm/include/asm/bitops.h:27,
from /git/arm-soc/include/linux/bitops.h:36,
from /git/arm-soc/include/linux/kernel.h:10,
from /git/arm-soc/include/linux/list.h:8,
from /git/arm-soc/include/linux/module.h:9,
from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11:
arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the previous definition

This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode")
Link: https://patchwork.kernel.org/patch/9200119/
Acked-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
Originally sent on June 27 when the warning appeared, but for
some reason the fix never got picked up.
---
drivers/tty/serial/8250/8250_fintek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 737b4b3957b0..0facc789fe7d 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -31,7 +31,7 @@
#define IO_ADDR2 0x60
#define LDN 0x7

-#define IRQ_MODE 0x70
+#define FINTEK_IRQ_MODE 0x70
#define IRQ_SHARE BIT(4)
#define IRQ_MODE_MASK (BIT(6) | BIT(5))
#define IRQ_LEVEL_LOW 0
@@ -195,7 +195,7 @@ static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode)
outb(LDN, pdata->base_port + ADDR_PORT);
outb(pdata->index, pdata->base_port + DATA_PORT);

- outb(IRQ_MODE, pdata->base_port + ADDR_PORT);
+ outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT);
tmp = inb(pdata->base_port + DATA_PORT);

tmp &= ~IRQ_MODE_MASK;
--
2.9.0
\
 
 \ /
  Last update: 2016-08-11 00:41    [W:0.130 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site