lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v5 5/6] usb: chipidea: let chipidea core device of_node equal's glue layer device of_node
Date
Hi, Peter

> -----Original Message-----
> From: linux-usb-owner@vger.kernel.org [mailto:linux-usb-
> owner@vger.kernel.org] On Behalf Of Peter Chen
> Sent: Wednesday, August 10, 2016 11:12 AM
> To: Stephen Boyd <stephen.boyd@linaro.org>
> Cc: Peter Chen <peter.chen@nxp.com>; gregkh@linuxfoundation.org;
> stern@rowland.harvard.edu; ulf.hansson@linaro.org; broonie@kernel.org;
> sre@kernel.org; robh+dt@kernel.org; shawnguo@kernel.org;
> dbaryshkov@gmail.com; dwmw3@infradead.org; k.kozlowski@samsung.com; linux-
> arm-kernel@lists.infradead.org; p.zabel@pengutronix.de;
> devicetree@vger.kernel.org; pawel.moll@arm.com; mark.rutland@arm.com;
> linux-usb@vger.kernel.org; arnd@arndb.de; s.hauer@pengutronix.de;
> mail@maciej.szmigiero.name; troy.kisky@boundarydevices.com;
> festevam@gmail.com; oscar@naiandei.net; linux-pm@vger.kernel.org;
> stillcompiling@gmail.com; linux-kernel@vger.kernel.org; mka@chromium.org;
> Peter Chen <peter.chen@freescale.com>
> Subject: Re: [PATCH v5 5/6] usb: chipidea: let chipidea core device
> of_node equal's glue layer device of_node
>
> On Tue, Aug 09, 2016 at 05:15:36PM -0700, Stephen Boyd wrote:
> > Quoting Peter Chen (2016-08-08 01:52:10)
> > > From: Peter Chen <peter.chen@freescale.com>
> > >
> > > At device tree, we have no device node for chipidea core, the glue
> > > layer's node is the parent node for host and udc device. But in
> > > related driver, the parent device is chipidea core. So, in order to
> > > let the common driver get parent's node, we let the core's device
> > > node equals glue layer device node.
> > >
> > > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> > > Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
> > > Tested-by Joshua Clayton <stillcompiling@gmail.com>
> > > ---
> > > drivers/usb/chipidea/core.c | 11 +++++++++++
> > > 1 file changed, 11 insertions(+)
> > >
> > > diff --git a/drivers/usb/chipidea/core.c
> > > b/drivers/usb/chipidea/core.c index 69426e6..b189dc7 100644
> > > --- a/drivers/usb/chipidea/core.c
> > > +++ b/drivers/usb/chipidea/core.c
> > > @@ -954,6 +954,15 @@ static int ci_hdrc_probe(struct platform_device
> *pdev)
> > > dev_err(dev, "unable to init phy: %d\n", ret);
> > > return ret;
> > > }
> > > + /*
> > > + * At device tree, we have no device node for chipidea core,
> > > + * the glue layer's node is the parent node for host and udc
> > > + * device. But in related driver, the parent device is
> chipidea
> > > + * core. So, in order to let the common driver get parent's
> node,
> > > + * we let the core's device node equals glue layer's node.
> > > + */
> > > + if (dev->parent && dev->parent->of_node)
> > > + dev->of_node = dev->parent->of_node;
> >
> > Can this be done earlier? Perhaps after hw_device_init() in this probe
> > routine? That would allow me to remove the awkward parent searching in
> > my ULPI DT awareness patch.
>
> The reason why I locate it there is to avoid "goto label" for error path
> during PHY's get and initialization operation.
>
> Ok, to simplify your work, I will change it at next version.

As iommu need this to be done even more earlier, will you consider to
put it before adding the core's platform device?

Li Jun
>
> --
>
> Best Regards,
> Peter Chen
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2016-08-11 00:21    [W:0.070 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site